batteries

Alright guys, been thinking about upgrading to LIPO batteries for some time now, but still do not have enough information. I want to achieve better servo performance and longer run times. I also want to cover these LIPOS in a battery box. I have not come across any LIPO batts that will fit in...

hi i ran my xbe on its factory packs and when i took them out i noticed the case was separated and the pack had swelled up a bit but returned to its normal size .. i havent got my fire proof bags so i have them in my room .. which is the coldest in the house .. are there safe to try to recharge...

Now that all the new receiver NiMH batteries seem to have the Tamiya (standard) plug for charging, I'd like Redcat or someone else come out with a new receiver battery box top which holds the plug so you don't need to lift up the body, unscrew the receiver box top, pull and then replace the...

Just a reminder to keep an eye on those lipos. I found a couple of the Redcat factory lipos extremely puffed from just being stored in a hot garage.

I just bought a new volcano exp and am using the stock charger and battery, i don't know how long it takes to charger. And when i get a nee charger and battery what should i get? any help would be appreciated.

Hello, I was just about to go on my fourth tank of gas, plugged in my charger and attached the battery. Soon after I saw smoke coming from the battery/battery wire, I disconnected the charger immediately. I am not sure if the battery is still good so I won’t be attempting to find out via use on...

Just picked up an xt,and as you all know the nimh batt that's included isn't very powerful,I have a 2s 5000mah 40c lipo and was wanting to know if it would be safe to use as my receiver pack ? Didn't know if the amperage would be to much for the receiver,steering servo and t/b servo. Any help is...

I'm looking for a a motor for a project xt I'm working on for my girlfriend. Doesn't need to be anything special, just to get her going. Also in need of an rx battery 3000mah Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Hi guys, I have a 6v NIHM 5000mah Receiver Battery! Can you charge a receiver battery that is half charge or you have to wait till it run out of power before you charge it? My second question: Is there a way to check how much power is left in the battery like a multimeter or something like...

Any body using DDM NIMH batterys ? just wondering if they are good or bad. lately I have been having some bad luck with Venoms 6v NIMH 5000mah

Dose anyone know of 8s lipo's that fit under the stock XBE body?

What battery should I use? And will it fit in the box? I'm leaning towards the Venom 6v 5000MaH NiMh or the DDM black magic 6v 5000MaH NiMH? I just bought my first 1/5 scale and have purchased/upgraded the servos to hi tech, 5 way splitter for servo, killer bee switch, jetpro exhaust, hpi filter...

What are the voltage and mah stock specs for the nimh battery that comes with the MT?

They are on DDMs DOTD. http://www.davesmotors.com/s.nl/c.885035/n.1/it.A/id.9861/.f

Bang for the buck. Rampage Xb-e stock motor and Esc., what's the best upgrade in batteries?

Does anyone run the FlySky GT3B RX direct on 2S LiPo? Any issues?

My son has an HSP 1/10 electric buggy. Its actually been a pretty good buggy. He is learning about doing minor repairs and has fun with it. Question is it came with a 7.2v NI MH batt. Is it safe to just throw in a Lipo 2s. Will this give it more speed, or no as it is only .2 volts more. I know...

It has the j plug connector to connect straight to the rx. Not to the on/off switch. I guess I'm going to radio shack to see if they have the male plug I need. Or... I could just cut the one off of the hump battery that redcat provided. Choices choices lol. Man, this site is great for bitchin...

Went shopping for a receiver battery this afternoon. DDM, Tower are out of stock, checked MaxAmps but didn't like the price (but they have the best power packs available), then went to A-Main where they are in stock "limited quaintly" . It's springtime and everyone is replacing batteries. Get...

So I know I can't be the only one that hates the screws for the battery box so I came up with this. I drilled the holes to accept body posts so I can open and shut the lid with body pins. Should be much easier.