• Welcome to RedcatRampageForum! Are you a Redcat fan? If so you're in luck as you've have arrived to the biggest and best RedcatRampage RC community.

    Come join our community and ask your questions, show off your Recat RCs and share your experience!

batteries

  1. B

    any onr check voltage on stock receiver battery charger?

    My charger says 9V and its only a six volt pack, not a big deal. Put my meter on it and got 15V. Ok or not? This is with out the battery hooked up. very low mah so im thinking volts might come down when charging.
  2. T

    Battery connector won't fit? Sure it will...

    I've seen this many times, you bought a new receiver battery and it won't plug into your receiver switch. I've read all sorts of ways guys go about trying to fix it. I've seen guys re-soldering wires, trying to seperate the wires from the connectors and all sorts of different ways... Here's a...
  3. M

    New battery and servos

    I bought the following items for my MT Pro and am having some issues; (1) DDM "Black Magic" 6v Ni-MH 4600mAh Hump Receiver Battery Pack (1) Hitec HS-5645MG Digital Throttle Servo w/ Metal Gears (2) Hitec 5755MG (Rhino) Digital Steering Servo w/ FREE DDM Alloy Horn Issue 1, Battery has...
  4. T

    killer rc lipo?

    Anyone know the c rating on the batteries?
  5. J

    battery or servo?

    What are the normal sympoms of when your battery starts to run down?, had the darn thing not run away but would keep moving no reponse from throttle servo, failsafe was not working at putting the brake on, removed failsafe vehicle ran normal for about 10min. then did the same thing. turned...
  6. C

    best battery pack to buy?

    That will fit into my stock battery compartment with no mod? Something in a 5000MAH range?
  7. Y

    Problem while charging my battery? Any suggestions?

    Hi, I have a question concerning the Onyx 220 Battery Charger. I have a new receiver battery (6v, 5000Mah) that I just started to charged so I put these settings (below): Bat. Type: NI-MH Capacity: 5000Mah Current: 0.9A S_Timer: off Peak: 3-7mv/c Trickle: Auto I've been told to...
  8. Y

    My battery is making me nervous? Help?

    I am charging my Futaba: 9.6 V, 700mAh Nicad Battery on my Onyx 220 charger. I am kinda nervous because I'll explain. At initial setting I put the battery to charge at Chg current: 0.1A the capacity: I put 700Mah. I put the timer off and trickle to auto mode. peak 8. Now the only thing I don't...
  9. Y

    Receiver Box/Battery??

    Hi, After I finished installing the Killer Bee Kill Switch, I realized how small the receiver box was! With the receiver battery in the box, the wires from the kill switch and the ones already there, I was wondering if its possible to charge the battery without unpluging the small receiver...
  10. Y

    Is there one of you guys that own or know about a Battery Charger called Onyx 220??

    Hi Guys, I bought a Battery Charger called Onyx 220 a while ago and I never used it yet, to be quite honnest, I really don't know how it work. There are several things I would like to know before I charge my batteries. I would truly appreciate if we could help me to understand this charger...
  11. R

    Battery charge rate ?

    I just wanted to post this because I know I asked alot of questions about this, I bought a new Venom 5000mAh battery and using a Onyx 200 charger and I am also now running a single Hitec 5805mg without the y cable, I charged the battery at 1.5 amps and for some reason I cant kill the battery it...
  12. L

    SOLD / FOUND DDM 4200mah battery, Hitec 5755

    Battery $25 shipped. Servo $55 shipped. All in great condition. Thank you.
  13. R

    Battery question

    I was out on another forum today and it looks like there is a bunch of people not real happy with venom batterys what do you people have to say on this subject ? I am using a 5000 mAh 5 cell nimh and while we are on the subject what are your inputs on the best charger for this type battery...
  14. R

    Battery?

    I am using a Venom 5000mah battery and a Killer RC smart volt meter after running 10 minutes volt meter shows battery is dead, truck still running, I checked battery voltage with digital volt meter showing 6.76 volts, put on battery charger showed full charge in 5 miutes any body ever use a...
  15. K

    Questions on running seperate Lipo for ESC fan / servo

    Can the stock ESC fan take 7.4 volts? I want to run my Servo (Hitec, no problem) Receiver and ESC fan off an 1800 mah 2s lipo...If the fan can take it, how does the wiring get hooked up?
  16. S

    how long do I charge my battery?

    Hey anyone know how long I need to charge the battery for the Dune Runner? And how long should a charge battery last? let me know thanks Sandman
  17. B

    battery/receiver box

    Hello. I am looking for a battery/receiver box, its part number 50160 anybody know were I can get one :confused:
  18. R

    rampage xsc battery charger

    Any kits or conversions out so you can charge battery without removing it from truck thx
  19. L

    Battery charger specs XT/XB

    Anyone mind writing the specs of your stock hump pack battery charger for xb/xt? amps,voltage etc... don't need input specs, just output. Thanks.
  20. P

    Charge battery maverick blackout

    Hello, am i stupid or do i have to remove the battery from the electronic box every time i have to charge the battery ? :confused:
Top