servo

Ok guy's need your help, my Throttle/Brake Servo went on my MTinstalled an HS-645MG servo, had to reverse the switch and it's working good....now the problem my kill switch blinks green then turns red brought the kill switch from RCDAD worked great but now the lights stay's red and cant start...

Maybe this has been asked before but are the redcat steering servo's rebuild-able.. I am still running my stock that has been a trooper in mud,snow,sand and several car washes.. it's getting massive slop on the output gear and that's says time for a new one! I am wanting to put the stocker in my...

1 stock one went bad. Just gonna replace both. Im running stock battery and radio. What servis would you buy?

ive got a 4 day old mt that loves eating up servos. first one was the stock one. may have been my fault because of linkage adjustment. second was a cheap towerhobbies that just quit working (old). third and fourth were futaba s3003 that stipped out on the brake side. cheap junk. what...

Well just wondering if its possible to get more turning radius without doing any major work

Ok I've installed a Servo Hitec hs5645mg on my rampage xt for my throttle and brake and for now I'm still useing the stock servo for steering till it burns out. I do have a new Hitec HS-5765MH when i need it. My question is when i use the brake and steering at the same time the th/b servo...

:confused: Well I have my Volcano epx well i was like this is a good stock car well all i drive is offroad well i took it to parking lot well the servos are crying for help it dosent like turning on pavement but its fine on dirt can i upgrade to higher tork servo without changing electronics...

Usually when the stock servos go nuts on the cats, these photos show why., This time the hot-+ wire broke at the solder joint. Its an easy fix, Just stay away from the lead free solder- use either a 12-15 watt iron, or if your quick, Radio shack sells a 25 watt pistol grip iron on the cheap...

I have a MT Pro Rampage new version 3. I was wondering if anyone knows the teeth count on the servos, both throttle and steering. Thanks

Hi there how are you guys i have a question regarding to my scale, i own a 1/5 red cat rampage Mt Pro truck but i 'm looking to upgrade new servos for my scale?? any recommendations for my scale i saw two types of servos for my scale but i don't know which one to use for my scale??one...

I just got a rampage mt. New servos etc. I bond the Rx to the Tx but when it's on the steering servo turns right and the servo tries to push it more (you can hear the servo working overtime). If I use the Tx the servo won't move. The throttle moves. Need help.

I just got my rampage mt in and I am trying to put it all together but I am overwhelmed. I have a few questions: 1. I am trying to upgrade the steering servo to hitec 805bb with futaba mount. But I notice on the other side under the battery box there is another servo (I'm assuming another...

So i had my original factory steering servo go out on my rampage xt, and i figured id go for broke and get the metal geared Hi tec 5765MH steering servo. Now when im trying to install the new one, it does not fit. :mad: What now? did i get the wrong one? Or do i modify the plastic bracket to...

I received a replacement servo today from Redcat for my MT and it has a "Waterproof" sticker on it. I didn't know these servo's were waterproof. Are all of the factory steering servos waterproof? I would love to wash the truck down (I know I have to keep the battery box dry) but I worry about...

So I finally started my Rampage MT today and ran it most of the day breaking in the engine. That is until one of my steering servos locked up. I know these are something on my things to upgrade list, but I didn't want it to break on the first day. Oh well, now for the next best thing to running...

I've had different r/c's for more years than I care to remember but I have never directly powered the servos. I've read this can be done but electronics not being one of my strong points I have no idea how to go about it. anyone care to share how it's done. pics would be great. thanks

just got mine in mail yesterday, beautiful chassis,, light,,, working on swapping some things over to it,,, how do u mount the steering servo on it,,, flipped redcats aluminum servo mount everyway,,, the servo will not clear the 10mm or so high aluminum center support machined into chassis,,or...

Anyone have any experience with this servo? I'm wondering if it can handle a 2S lipo. I'll probably just throw in a Hitec to be safe.

Anyone have an extra bushing in their parts bin. I fixed my Ackerman & somehow created a new problem. Lol. It's for the saver post opposite (driver side) of the servo saver but I think they're both the same. Maybe a hardware store will have one? They are closed now tho.

Hey guys, I have been having issues with my servos and I need a good solution that will last me awhile. I have read on here to use the Hitec HV servo but since I didnt want to run a lipo battery pack I found it didnt have enough power to really turn my wheels like the stock one. So after...