servo

Hey guys. I got my MT today. I know everyone's reaction is shocked at how big it is when they see it for the first time- I now share in that awe. It's GINORMOUS! Lol Here is my question. What is the process of installing my new steering servo? I know it currently has 2. What needs to be done...

Hi, I am researching Lipo batteries and I saw a few threads saying the Thunderpower lipo will fit Rampage Mt v3. Does anyone know which one? Thanks in advance!

Hi, I'm new to the forum and need help! I was 'tweaking' my throttle servo (Hitec HS5645MG) servo and shreaded the splines on my plastic servo arm - I now need a replacement as it's slipping on the servo splines. I have throttle and brake so I presume I need the double sided arm and would like...

Does The Rampage MT V3 come with dual steering servos

I replaced my throttle/brake servo with a savox so i was going to put the stock servo in my sc10b and sell it. However is the stock servo better then a Traxxas 2075 because if so I'll put it in my scx10.

I could just simply ask what servo to run but I'd like to understand what all these numbers mean. Here's the battery I have. 5900mah 6v battery hump pack. So I know I have a 6v system. I hear ya'll are running 7v. How much difference does that make? I assuming I have to upgrade to 7v...

Been out running my chimera today since I installed the Roto Starter. I'm not really impressed with the steering servo nor the throttle Servo. What metal gear servo are you guys running in your?

********moved to the "electronics" section*******

DDM had the 5765 on DOTD. http://www.davesmotors.com/s.nl/c.885035/n.1/it.A/id.8681/.f Use RRF discount code for an additional 5% off.

I have a jr z9000t servo and I wanted to know if I could use as the break/thr on my xb. Spec Type: Digital Torque: 300 oz/in @ 4.8V, 370 oz/in @ 6V Speed: .18 sec / 60 degrees @ 4.8V, .15 sec / 60 degrees @ 6V Dimensions (WxLxH): 0.827x1.59x1.569in Weight: 2.3 oz Bushing Or...

Works prefect, lots of torque. $75 shipped.

The stock radio looks to be pretty cheap, would like to upgrade to better quality radio and receiver, but I have not bought an RC radio in 20 years, whats a good choice? Is there anything better than the 2.4 ghz for range? Also want a more heavy duty steering servo? Suggestions?

Does any body know what aluminum servo horn for steering will fit the chimera?

Want to upgrade my steering servo to the Hitec HS-5805MG. Would I need to use the 050010 - Aluminum Servo Mount? thanks

Hey, I just bought a hitec 5645 servo to replace my busted stock one in the Rampage XB. The thing is, I thought it would be a take-out stock, put-in replacement kinda thing. However I received a servo in the package that seems to me to have over 15 different pieces. I am clueless as to where...

Hi guys, I was driving my XB around the street today and I "bumped" the sidewalk. The speed was very low, no more than 10mph at most. The car didn't fly into bits and nothing broke off but the "steering servo rocker saver" had a problem: The bar that connects the two sides somehow popped...

ANY parts around for this or just go DIY custom? looks like you can invert Rt.side stock to Lt.side mount post. any ganged option setup for same side addition? MT is double servo steer right? some guidance would help shorten the search. thanks

Hi guys, Just got a Redcat Rampage XB (gas). Having a major blast! I broke in the car properly (1:~25 oil to gas, ran it idle for 1 tank, then low speed for about 3-4 hours). After that, I started going hard on the acceleration. After that, the idle RPM was too high so with a little...

I installed a pair of Hitec 5765 servos today and have a question. While the power is on I hear a faint whine from the servos. Is that normal?

Any headway on the servo mount Doug?