servo

  1. C

    Steering servo's for Rampage MT

    Hi, I'm new here. I'm wanting to upgrade my steering servo's after a melt down. Would Savox 2290's be a good choice? Thanks in advance.
  2. D

    Suggestions on decent steering servos?

    New to 1/5 scale and looking for suggestions on a decent steering servo.
  3. imaudi5000

    Are my steering servos burnt out?

    I know there are a ton of threads about steering servos, but I wanted to share a video of mine and see if anyone could tell me what actually happened. I noticed the steering was super slow and whining after a run a couple weeks ago and thought it was just a low rx battery (stock everything btw)...
  4. G-Man

    Single Steering Servo

    What's up guys. I have modded my MT to single servo steering awhile back. Initially I used the Spektrum s9020 at 7.4v. After stripping the top gearset three times, I finally got annoyed enough to try something new to me in this MT. I have tried probably four different combinations now. So I have...
  5. Petrolheadz100

    Hitec d845 for single servo steering?

    At 6v the Hitec D845 servo puts out over 550oz torque. Anyone using one and know if it bolts in with no modification?
  6. S

    Servos go crazy when engine go high rpm

    Hi everyone, I have a rampage mt and was working just fine until I start to have problems controlling the truck. When the engine is off every servos work just fine, but when I take off and goes more than 8000 rpm steering servos go to the right or don’t work uncontrollable. What can be? Thank...
  7. Petrolheadz100

    Steering servo for rampage Chimera

    Anyone know if the hitec 5805MG will bolt right in without mods?
  8. Petrolheadz100

    Recommended steering servo for Chimera

    Looking to see what my options are for a upgraded steering servo from the stock hex fly that will screw right in with no mods
  9. G-Man

    Rampage MT Servo Upgrades

    What's up Guys. I am going through My MT rebuilding the diffs and putting aluminum housings in. Anyways. While I had it apart I decided to try a different throttle servo from what I had been using. I will explain My setup. I am using one Spektrum S9020 steering servo and a Savox 1210mg throttle...
  10. T

    Rampage MT steering

    Hey guys, Got my Rampage MT, made it single serving with the single serving saver set up. There is a lot of slack in the steering, is this normal? Servo save is tight and both nuts are tight on the rod connecting the wheels together (maybe tie rod?) It keeps me from getting a good alignment with...
  11. wz3s26

    Servo mount HS 805BB does no fit

    Was running a E210 stock dual servos. Bought the Hi-tec HS-805BB, its much bigger and does not fit, what do I need..? Thanks
  12. J

    Savox 0236mg servo questions

    People who have installed one of the Savox 0236MG servo, will the Redcat Rampage MT wheels turn freely when on the ground on 6v? Anyone had bad luck with this setup?
  13. C

    Who's Using Hitec Steering Servos? - Help

    Just picked up a HS 5765MH from local hobby shop for steering in my XT. I noticed the horn post (splines) on the hitec servo is smaller than the post on the stock servo. Therefore the linkage on the truck is too big for the post on the hitec servo. This was an out of box special, so all I got...
  14. T

    Servo repair via monoprice select mini 3d printer

    I have been having issues with the servos on my xb. And to top it off I haven't been able to get a replacement for the steering servo as most hobby shops don't normally keep them in stock. I was able to get a savox sa-1231sg which is a 1/10th scale servo with a torque rating of 444 ozin at 6v...
  15. R

    Please help its my first rampage mt

    I just got a rampage mt its got dual steering servos its new the body was painted but looks like it was orange originally with a aftermarket exhaustpipe. Its got a hy sticker with numbers on it and i been tryin to figure out what size engine it is the kid paited the covers it needs a pull start...
  16. R

    Steering servo

    Hey guys, I just bought a metal gear steering servo from redcat. Part # 520199 ME. Have any of you had this one before did is it a good one? Cheers.
  17. R

    Will Hitec HS-5645 MG fit my Rampage XT?

    Hello, will the Hitec HS-5645 MG fit my Rampage XT? Will the stock remote work? Can someone recommend a good steering servo as well? Sorry for all the questions. Just bought my truck 3 weeks ago... Cheers.
  18. B

    Recommended servo upgrades for Rampage XT?

    the throttle servo failed on me this weekend.i think it is time to upgrade.what do you guys think for both throttle and steering servo upgrades.i have a futaba s3003 on the shelf that I can use till I get a better one,i don't think the s3003 is a very strong servo for the truck.any suggestions...
  19. C

    Redcat rampage mt steering

    So bought new servos hoping it would've fixed my problem but it still does it seems to have a lot of tension on the steering servos when I power on the truck and remote and here's a video to see what I'm talking about
  20. R

    Throttle servo glitches

    So, I just got my brand new Rampage MT. I installed an aluminum roll-cage and a tuned pipe. Going through engine break in and the throttle servo is going wacko! When engine is not running, everything is rock solid. Works perfect. After I start the engine the throttle servo glitches back and...
Top