servo

ok bought two 5765 steering servos easy to put on but have problem if I go left steering arm hits battery box and also right side hits differential I have the arms on the first hole of the horn ,never did before tried adjusting end points and didn't help also servos make slight whinning sound...

just wondering how much slower is response with the 5765 vs the stock one my stock one locked up and need new steering servos ?would 2 755s work or to slow

Must of vibrated loose. Everything's intact except the bolt that holds the arm to the servo. Any special bolt I need? Anyone know the size or reccomend anything to make sure it keeps intact? It was the first run out. Had some fun.... :)

Can anybody recommend me a couple of Hitec High Voltage steering servos? I need some options. Thanks

Does anyone recommend on the mt going down to one steering servo or staying with two? And you do say one what you you recommend? Thank you

Hey guys i installed hitec 645mg for brake and thottle but it has a lot of swing i wanded to no if u can set the end points with stock transmitter or do i need to do somthing else. I also had to reverse thottle swich and rebind recever for failsafe. Any help would be sweet!

Hey does anybody know a good upgrade steering servo i like how the baja turns i tired putting that in but wasnt a direct fit does anybody know a direct fit for the steering

I really need a stiffer spring for the steering servo saver...

Just a thought.... another HiTec servo would only be $50. Switching to a lipo system (if I remember right will be around $150). I have a 5900mah 6v battery and love the longevity so would kinda like to keep it. I tried a 'search' with no relevant results. Is there a dual servo conversion...

looking for a steering servo for my XB

Hey guys. I'm going to be asking a lot of questions. First off, you guys here are great! Are the stock servos on the Rampage XT water proof? I won't be swapping them out until an issue comes up. I just want to be aware of puddles and moisture. I've noticed the Redcat claims that they use water...

good evening all so take out the DR for the first time and break the servo horn for steering. question is do these break all the time as i thought that is what the servo saver was for well along with saving the servo? second part so i bought a new one online an it was part number 50118 i think...

I'm looking for a couple of new steering servos for my MT V3 and I came across these Hitecs on DDM's site,Hitec HS-805BB,they're in the parts section under the redcat rampage on their site it says these servos work great for the 1/5 monster truck,has anyone tried these servos and how did you...

Hi Guys. I noticed a lot of posts regarding faulty steering servos. I experienced a failed steering servo as well. After disassembling the servo a noticed the three main little wires came loose on the little pc board. I just silver soldered them back onto the pc board and “Wallah”. Fixed...

This dual steering is installed to prevent steering servo failure? Or increase turn response time? Is it need for just normal bashing about? Thanks

Ok fellas. I'm hoping you all, or at least some of you can educate me. I've got a new to me MT. Got it off of ebay for a song, so the wife would be happy about the price paid. Planning on doing several upgrades, to include the servos. There's a ton of posts on here about which servos to...

what size aluminum servo arms would i need for the throttle and the sterring on my mt? or is it not worth getting them,and staying with the stock ones

Finally got all my upgrades done, this 2spd is crazy!!! But I was running without the body and splash thru a big puddle of water. The steering became limited and now won't turn at all. Could I have short circuit the servos with the water?

What's everyone running for there servos on the MT

Looking for a shot stock steering servo that I can use for parts..