• Welcome to RedcatRampageForum! Are you a Redcat fan? If so you're in luck as you've have arrived to the biggest and best RedcatRampage RC community.

    Come join our community and ask your questions, show off your Recat RCs and share your experience!

dunerunner

  1. R

    Changing a Dunerunner 4WD into a 2WD

    Anyone tried turning a Dunerunner 4WD into a 2WD by removing a shaft ? If so what is the better way to do it ?
  2. R

    Engine running out of gas with half tank

    Hi everyone, Just got a new DuneRunner today and I'm going thru the break in process. I ran it idle for 30 minutes and after that started to drive it slowly around the house (20:1 mix) and it seems that when I get to about half thank, the engine seems to be running out of gas for a 30 second...
  3. M

    transmitter and receiver

    hi guys so got up this morning to go out for a blast on my dune runner having some transmitter receiver problems im using the standard transmitter/receiver for some reason there is no control on steering and throttle the receiver is showing that they both transmitter and receiver have bind but...
  4. M

    clutch housing

    hey guys so the rcmk full mod engine from gizmo will be ordered this week just wondering what clutch housing is best for the instalment to my dune runner v3 with out any modifications if possible ?
  5. M

    front diff housing

    hi redcat fans does anyone no the part number for the front diff housing on the dr is there an upgraded part as well i had a crash to day hit a trailer ripped the bolts ot the housing witch hold the bottom arms in place not good gutted seen as i just repaired it today :( :( :(
  6. M

    Diff. Cups

    Whats the different between 54023 - DuneRunner Diff. Cups and 50031 Diff Joint Cups they both say Compatible with: Rampage DuneRunner???
  7. M

    Gas Tank

    Well just got my dune runner 2nd hand and the gas tank is rubbing the Center Dogbone cup. So i drilled and moved it forward a little anyone no why???
  8. M

    rcmk engine

    ok so iv got some spare cash and im looking at buying a new engine for my dr iv taken a fancy to the rcmk but witch one the rcmk cr290f or the rcmk cr300f witch one do you guys recomend i can get the cr290 a lot cheaper than the cr300 400 usd for the cr290 and 479 usd for the cr300f is there...
  9. N

    Looking for a good pipe

    Looking for a good pipe for my dunerunner but not a fan of the side mounted pipes. I got the stock motor 30.5cc but I'm switching it out to a rcmk/zenoah full mod 29.5cc like the pipes in the rear mainly any thoughts on Wyatt fits and is a good pipe also pics always help Sent from my DROID...
  10. K

    motor temperature

    i think i may be running a little hot. i cant find information on the heat range of these motors.does anyone know what the heat range is and the best place to take a temperature reading? also, are these motors like nitros? can you use your temp readings to evaluate your tuning?
  11. N

    Upgrades???

    K people i got sum playable money and i wanna upgrade my dr so far i got rcmk/zenoah full mod 29.5cc motor, wb 990, xcan, hitec servos, lipo conversion, and kill switch but i wanna get sum more upgrades anyone have ideas on what to get? Thanks Sent from my DROID RAZR using Tapatalk 2
  12. A

    wanting a dunerunner

    how does everyone feel about the dunerunner? is it built tough?
  13. M

    Belt brive

    I order a MT / Dune Runner Belt Drive Kit and when i try to put it on its hitting the side guards. Did i order it wrong or do i need to do something different.
  14. M

    chassis bracing

    hi guys does anyone no if there are chassis bracing parts for the dune runner like you can buy for the xb
  15. N

    New motor

    Just ordered this motor for my dr just wondering what people opinions are and if anyones running it on here http://www.gizmomotors.com/index.php/online-shop?page=shop.product_details&flypage=flypage_images.tpl&product_id=2229&category_id=232
  16. K

    screes for 1" velocity stack

    Need help finding the right size screws for the 1" velocity stack from DDM. I went to put it on, but the m5x55 screws are not long enough. Does anyone know what size screws I need so I don't screw up my cylinder?
  17. K

    dunerunner shock options

    im thinking about installing new shocks on my duney and i would like to hear what you guys are running. i assume the best bet would be to run shocks that are made for the baja, but what mods are neccessary to run em. new hardware? any advice appreciated. just want to hear what options ive got.
  18. M

    steering servo

    hi redcat dune runner owners some bad news just broken the steering servo on my dune runner so im looking to get an upgraded steering servo from the standard one witch would you recommend im after something strong fast a torque so iv been looking at the hitec hs 5765 or do i go all out and get...
  19. K

    metal shavings in chassis

    so i keep finding metal shavings in my chassis underneath my motor. it really scared me and i couldnt figure out where it was coming from. i took my motor out today to install a new pipe, and when i started putting the screws that go through my gear plate and into my clutch housing, tada, i see...
  20. M

    belt drive

    hi guys anyone no anybody willing to ship me a belt drive gear set to the uk united kingdom if so plase get in touch with prices and shipping costs thanks
Top