dunerunner

i just found a velocity stack that comes with a choke that is built in. this looks great being ive got a walbro 990, which has not choke, and i live in colorado which can be a pain when starting cold. my question is, has anyone tried these? are they worth it? also, i noticed the one i see comes...

hi just thot id bring the subject up but has anyone tried and tested the roven 4 bolt engine kit you can but of ebay for peanuts is it worth the investment it seems a little to good to be true :confused: :confused:

i reinstalled my firstway lay shaft(the gear shaft that goes to the brake shaft) today because i snapped my original one by tightening the lock nut too tight. well, now the shaft has some movement,about a quarter inch of movement in and out, which makes my gear wiggle a little bit. im not too...

hey my fellow redcat dune runner friends im back its been a while does anyone no if there is any brake upgrades you can get for the dune runner the standard brakes are ok but iv seen on ebay carbon brakes just wondered if anyone had tried and tested them or something better send me some links if...

I seam to have a problem with my exhaust. ive noticed with the stock exhaust can that if i take my stinger off i get a lot more low end power. the only problem is the exhaust blows right on my wing and wing mount. do you guys think this wil eventually melt my wing and mount? also, i am thinking...

Because the Dune Runner V3 4WD does not have a parts manual like the XB and other models do, how do you guys find part numbers? Calling Redcat is one answer but that is not very self sufficient. I did find the parts manual for the Dune Runner 2WD but that does not mean the parts for the 4WD...

I got a redcat tuned exhaust for free when i purchased my dunerunner. I know its not a good exhaust and will melt but I figured I would just use it until it melted then go buy a better one. Well, I got my dunerunner from ups today, broke in the motor with the regular exhaust that comes on it...

made a set of windows for my d/r out of lexan that I picked up at the local lowes they're held to the roll cage with 3/8 plastic cable straps since that's the only kind that I could find after checking all the local hardware stores. my question is does anyone know where I can find these 3/8...

I understand that his is a subjective question. I have a new dune runner. I also have 2 Rampage XB's. All these cars are GAS. My dune runner will not stop within an acceptable distance. For instance on a throttle blurp the car moves forward, when I apply the brake, it coasts to a stop. At...

So im having trouble getting the shock caps off any ideas? I saw a post about a guy milling a flat spot. Being I don't have a mill what else can I do? newb here

Saw this on ebay but it says its not for the v3 dunerunner. Where can I find one for the v3? Ebay only had these http://pages.ebay.com/link/?nav=item.view&id=261183518010 newb here

So I took apart the servo saver/bellcrank and im missing a washer any ideas on a part number for it newb here

Built for the 30.5 modified engines. Dyno data looks promising. Looking at the picture of one mounted on a 5b, it looks doable on a Dune Runner, without having to modify the roll cage. Not pretty, but pretty gets dinged in the dirt. And they run along the right side of the buggy, out of the way...

Saw this motor on ebay any thoughts? Thinking of upgrading to it soon the power seems almost 3x the stock motor. Can the stock drivetrain handle this? http://pages.ebay.com/link/?nav=item.view&id=330848766809 Sent from my GT-P5113 using Tapatalk 2

Put the Dune Runner on the BMX track at Edwards AFB today. 3 hours of fun! With the OBR Prostroke 30.5, the buggy has plenty of power. This video is when I made it around, earlier I was doubling jumps, but keeping the buggy on the track was a problem. I need more practice, BUT the Dune Runner IS...

Im looking into getting a carb for my DR but I don't know the difference in the carbs with a choke and without a choke. Is it necessary to have a choke? Im new to the gas rcs. I usually stuck to electric. Sent from my GT-P5113 using Tapatalk 2

Ordered a pair of HPI 5T paddles and Split Six wheels. Any suggestions for the best foam to use.

Ran the buggy today, finally! First impressions, the OBR Prostock 30.5 is STRONG running with the X-Can and 8" stingers. Big improvement over the stock 30.5. The belt drive is great, but Brian, you need to tell people to use RED Loctite, I tried Blue and ended up chasing parts across the...

Greetings, I just started the conversion. I got it Friday, stripped it, and now it is at my local machine shop. He said it will be about 2 weeks before he can get started (2 driveshafts and a motor mount). As soon as he gets started and I get the DR back I'll start posting pics. I'm using...

After doing all the wrong things, I thought I'd pass on the easy way to change the brakes on a Dune Runner. 1: Pull and bag the carb 2: Loosen the set screw in the brake post, remove the linkage 3: Remove the plate over the gears and brake, pull out the brake post 4: Take the...