dunerunner

Hey Im new to dis forum and new to the petrol buggy's ive got a brand new dunerunner and its not starting and it doesn't sound like it wants to start

Hi Guys I know there's a belt drive avail for the DR but has anyone heard of a chain drive anywhere? Thanks Phill

I have a Rampage Dunerunner 4X4 that I would like to convert to electric....I've had enough of trying to keep the gas engine running. Can anyone tell me if the Castle XL2 (stock no. Bt500) conversion kit sold by DDM Racing will fit the Dunerunner? I know that the ESC and motor will fit and work...

I'd like to change the rear toe in. Looking at the Hostile one piece carriers on the 5b, I think they'll fit on the arms, and the bearings are the same size, 24x12X6. Might even be able to use HPI axles. No adapters would be needed then. Has anyone tried this?

Hi Guys I'm just wondering what the small holes in the carb and manifold are for. The stock manifold has 2 - one top and one bottom but the DDM billet manifold and gasket only have one. Thanks Phill

hello everyone, i just found a 1/5 Dunerunner 4x4 with 28.5 cc engine on CL and talked the guy down to 200 bucks. no controller and needs a couple parts put back together. my question is would this be a good project buggy? are these reliable engines or should i be worried about having to buy a...

Hi there, I just got a Dunerunner and it started great on the first time:cool: . I run it in for about a tank then stopped it. Another week or so goes by; then I try to start it but there is no spark whatsoever :confused: . I kept on trying to start it and the pull start was very hard...

The driveline to the rear diff rubs on the bottom of the engine crankcase when you run hard. Too much flex at the rear of the chassis. I'm thinking about a couple of L stiffeners underneath welded in, running to about half way under the gas tank. Or a steel roll cage. Or, Possibly, making...

More specifically near or in the Greater Toronto Area? If so, I was wondering if you've ever been to RC Acres with your 4x4 Runners? We have a track in Flamborough/Hamilton and get LOTS of HPI Baja's, but have yet to see the 4x4 Redcat's come around. www.rcacres.ca Would love to have...

Hi Guys I'm having flooding probs The car starts OK and runs but as soon as I back off the throttle it stalls and won't start. I've gotten to the point that I've pulled the Walbro off and put the stock carb back on to see if it made any difference but it hasn't The Walbro was sticking at...

Hi Guys Just after some opinions on pull start outerwears I run my DR on dry grass and the bottom half of the outerwear between the splash guard and the pull start gets packed solid with grass to the extent that I have to either take the splash guard off or dig at the grass with a...

Hi Guys My head and exhaust keep coming loose even though I've used red loctite and anti shake washers. Does anyone have any ideas on how to keep em tight? Thanks Phill

Had a little accident this weekend ... Time to upgraded ... Who's got aluminium diff's for sale ?

I noticed, since the drivetrain is apart right now, with the drive belt off, that since the humidity increased the clutch is now dragging slightly in the bell, before the clutch would spin freely. Nothing else, just the humidity has changed, with the buggy sitting on the bench in the air...

Been referencing this site a lot so decided to join up I bought a d/r about a month ago did a couple of mods already ... Still need a belt drive but think I got the basics covered so far

hi people noticed on my dr im missing some bolts any idea what size are the the bolts bolted to the bottom of the gear plate are i need to find this out before ordering some thanks if you can help

HI, I just picked up a used redcat dunerunner 4x4 30cc fuelie motor over the weekend, the guy I bought it from said it ran great but the batteries were to low to test drive for long. The problem is, it does start and runs good for a few minutes, during high speed passes it will bog and stall...

Hi Guys I took my gears out (metal pin type) and am not sure if I've got them right. I know the big one is right as the outside centre but not sure about the others. Does anyone know which one goes where? Thanks Phill

Hi Gys I'm looking for help again. I've been on DDM looking for a head gasket for my 30cc Dunerunner but am lost. Could someone point me in the right direction please? Also do I need a ring compressor to fit it or is there a knack to getting the piston back in? Thanks Phill

Hi Guys Just been on DDM trying to find a 668 for the 30cc DR but there's about 10 different ones and none look like they have the right throttle linkage. Can someone point me in the right direction please? Thanks Phill