rampage mt

Ok so, I am SICK of constantly re-tightening the set screws in the dog bones. Yes, I use loctite but only blue. The set screws still back out. Is there ANY better axle able to be installed on the MTs? I mean even if you have to modify something, I wana know. Only thing I can Google are...

Thinking about buying a rampage mt v3 any companies make chassis braces I heard the middle bends on the chassis

Hey again all!! I am looking for street tires for my MT. I seem to run way more on concrete vs dirt, etc. The concrete just eats the stock monster truck style tires FAST! I think I'll have to order a different ratio belt for the transmission as well... I think. (Right? I have the 1:1 belt...

Hi all, I am having issues with my truck (32cc) not running when I open the choke. It runs and starts with the choke on but as soon as I open it, it dies. Also when I apply gas with choke on it dies. I have a Walbro 1107 carb (factory settings) and an aluminum intake from Ddm. I also have the...

I'm curious what engine this is when looking for engine parts. Is this "CY29RC" or... I have no idea. I wanted to see if its possible to increase the displacement via larger diameter piston / head. I have no idea what options I have, or should I just save $$ for a different engine? I don't...

Hey all. I had upgraded the stock servos to a single servo. I put a Hitec HS-5805MG in and it works pretty well. (I have the Futaba metal servo mount.) Not too unhappy especially since I don't need 2 servos. But, turning lock to lock while not moving doesn't seem to be possible. I want a...

Well just thought I'd share a little about my first 3 days with my MT v3. I started the break in process ran about 1 1/2 tanks through it and it wouldn't move try to accelerate and it just sat there. Found out the break was locked up one of the adjustment set screws fell out. Got that fixed and...

After 3 tanks of gas engines revs up but truck won't move. I belive it's the square transmission next to the brake. How do i remove it

So, Ive experienced probably all of the issues that can occur on the MT's. I still love it and plan on upgrading until it doesn't freaking break. At any rate, I usually google search my answers but cant really find much. I was running my fairly new MT yesterday on the last break in tank and...

Hey Rampage MT guys. Do any of you use a Flysky it4s transmitter and receiver? I have one and want to use a 7.4v lipo to power the rx. Anybody use this setup? Seems my hitec steering servos don't like the 6v nimh hump pack. Thanks

Hi anyone know if there's any good deal for the mt I've seen one for $780 with tune pipe.

Just purchased my first gas rc tonight. I've done some research on nitro/electric/gas and different brands and I decided to go with the Redcat Rampage MT. It also comes with the tuned exhaust which i will install at some point. Wasn't sure if I can throw it on right away or wait untill after i...

Boxing day sale, no nagging wifey, home research, nap. It was standing proud on the kitchen island at 4pm. Near as i can tell its a v3, has 32cc and metal gearing w dual steering servos. Besides threadlock on the metal to metal i would love to hear input. Not my first rc, played 20 yrs ago but...

Okay trying to choose which one to get rampage mt or the mt pro I've been doing research for 2days and with a $440 price difference what do you guys think I'm well knowledge around two stroke engines been around nitro been doing the hobby sine I was 7 any advice or opinions would help me decide...

I am having problems with the stock MT CVA Axles. They don't hold up at all on my rig. I have snapped the shaft, broke the pivot points, lost pins out of the pivot(which I have since resolved). My question is is there an upgraded axle to be used in the stockers place? I can't seem to find any info

hi there, i'm in the process of using fuel stabilizer in the tank and run the rampage for 3 minutes to get the stabilized fuel through the system, i was wondering if i should use fogging oil spray in the engine to prevent corrosion from starting in the engine? thanks

im wanting to use a Spektrum? DX3C with my rampage mt,,,,any known issues?

Does anyone make an aftermarket chassis for the v3? Ive had problems with two now bending in the front where it gets thin. I know its from hard bashing and end over end flips. Looking for something a little stronger and a little better looking i guess.

Well after spending several hours today trying to start my stock 32cc fuelie I have come to the conclusion that it is a compression issue, I would assume with a reading of only 70 psi. I then added a small amount of 927 2 stroke oil to the cylinder and retested at 120 psi. So I am assuming the...

Was thinking about putting on smaller wheels, use the charger body, make it look more lean and mean. Any thoughts on smaller front wheels? Also, I think smaller front wheels will make it easier on the steering servos, with less stress. Any low profile file knobby tires designed to fit the MT?