• Welcome to RedcatRampageForum! Are you a Redcat fan? If so you're in luck as you've have arrived to the biggest and best RedcatRampage RC community.

    Come join our community and ask your questions, show off your Recat RCs and share your experience!

rampage mt

  1. M

    Charger body on the MT?

    a modified 1/8 scale charger, was wondering how it will look on the MT, any thoughts?
  2. M

    Dodge Charger Body for Rampage MT?

    Im experimenting with a 1/8 scale charger body, extending it the length of the 1/5 scale and was wondering if it looked rad or not....any thoughts?
  3. G-Man

    Excessive battery draw on MT when steering

    I have had my MT for a few months now and have replaced the throttle servo due to it failing with a hitec. I am now experiencing the rx battery going low at 1/2-3/4 tank making my tx warn me when steering only. The voltage will be 6.11v turn the steering and it drops to 4.2v. I used to get...
  4. D

    the redcat mt v3

    ok to anyone who is thinking about buying this beast of a truck.....i have one and at the beginning i had starting issues....my issues are now gone...starts pretty easy now...but i had the tuned pipe from redcat on it...and now i recently bought a pipe from DDM...i bought the dominator pipe and...
  5. M

    Smaller wheels for the rampage MT?

    What is a good wheel to use that is smaller for the MT? Smaller wheels, less stress on steering servos.
  6. D

    Rampage mt Steering servo options?

    Would you guys recommend 2 servo Turnigy 1270HV or 1 servo Savox 0235 ? It''s for Rampage MT.....
  7. M

    Steering servo upgrade for the MT?

    Was wondering what is a better choice than the stock servos in the MT ? I thnk the gears are stripped in mine, or can I take apart the servos and upgrade the gears instead??
  8. G-Man

    Rampage MT aluminum suspension parts good idea?

    I have been kicking around the idea of installing aluminum suspension parts in place of the OEM plastic. I have broken a few steering knuckles and steering links. I am wondering how the aluminum holds up and weather other parts break instead now that the aluminum is used.
  9. GJB56

    MT wheel hub replacement pin

    I see that DDM sells a pair of hubs but I just need the pin. I think they are 5/32 x 7/8 or 4mm x 21.7mm. Has anyone been through this and steer me to a site? Gary
  10. GJB56

    Rear mount JetPro

    I just installed a rear mount JetPro pipe on my MT. I read a lot of good things on this forum but was still in awe of the performance boost. I hate to say 'too fast' on this forum so I will just leave it at OMG!!! But even more remarkable was my interaction with Dino. We had a couple of...
  11. D

    Rampage mt wheels adapter?

    http://www.ebay.com/itm/HPI-1-5-Baja-5B-Gas-24mm-ALUMINUM-WHEEL-HEX-HUBS-NUTS-STEEL-PINS-Gun-Metal-/371589029122?hash=item56846e9d02:g:d6sAAOSw6wRW~aBC Would these adapter fit my rampage mt so i can use a wider selection of tire from hpi tires etc..? thanks
  12. D

    Rampage mt Rear chassis braces

    Does anyone knows if they make Rear chassis braces for the Rampage mt?? i know they make the front one...but couldnt find the rear braces on redcat website....thanks
  13. D

    rampage mt Rear differential keeps breaking????

    any idea why everytime i take my rampage to make a small jump , my rear differential gears breaks??? it's the second time that i have replaced the crown and pinion gear...starting to lose hope in redcat.... :(
  14. D

    fuel for rampage mt v3 monster truck

    right now ive been using 20:1 fuel for my truck...the hobby shop i got it from is out..wont have any for a few weeks...what other pre mix fuel ratios can i use an it not hurt the motor
  15. GJB56

    Does running with the body on affect carb tune?

    I believe I have my carb tuned pretty good. I kill it on a WOT run and the plug is paper bag brown. When I put on the body it runs okay for a few minutes then starts to get sluggish before it just stops and won't start. I change the plug and run again without the body and she runs great. My...
  16. G-Man

    Rampage MT center differential gears binding - Help Please

    I am having serious binding issues with the two gears in my center diff. Here is how it started. I noticed the center drive shaft drive cup going to the front diff was loose and lost a set screw. So I ordered after market cups with the stainless sleeves pressed on etc. I installed the new cups...
  17. D

    my rampage mt monster truck issues

    ok i did have probs getting my truck started...but i finally got it going an been running it...but now while im running it an its not out of my range...it will just up an stop...it stays running but it stops an i pull the throttle an it wont go...i have to walk towards it a little bit an it will...
  18. G-Man

    Hitec Hs-5645MG throttle servo in Rampage MT

    Hello. I just purchased the Hitec HS-5645MG servo for the throttle and brake to replace the original Hexfly junk that quit working. I am wondering if there is a specific procedure for the installation that somebody can recommend? I have read about setting the end points but can not find info on...
  19. D

    Stage 8 Locking Fastener

    Anyone knows if Stage 8 Locking Fastener will fit a jet pro side mount pipe mounted on a redcat rampage mt? here's the link : http://www.davesmotors.com/Stage-8-Locking-Fastener-Exhaust-Bolt-Set-for-R-C-Exhaust-Manifolds-AB1005008020F3.html
  20. S

    Redcat MT Bearing Go to Guide

    So I snapped a rear Universal Drive Joint (050009) 1" down the shaft from the Diff and then lost the Pin in the front UDJ that goes into the hub. So it's time to upgrade, I've been reading around and started to realize that the MT isn't the upgrade happy truck that the smaller XB and XT are...
Top