bearings

Trying to find a rubber sealed chrome plated steel bearing for the xb. 22mm od x 10mm id x 7mm wide. tried fast eddy- vxb, others also- no cigar. any ideas where this could be bought? thanks.

Looking to replace all stock bearings in my MT,looking at kits from boca bearings,there kits only have 16 bearings,after looking at spec sheets I see 19 bearings,has anyone ordered kits from boca,how many bearings do you find.

I have a Rampage XB. I've read about weak bearings so, I replaced the f/r knuckles and carriers with 7075rc parts and heavier bearings. What about the longevity of the drive line and diff bearings? Should I also be concerned with those as well. I have 10 tanks though it now and it seems fine...

Hey guys, I noticed today that one of the front hubs has bearing play, while the other does not. Examining the hubs, I did not see anything that alows for pre-load adjustment. I'll describe what I see.. There is the hub, inner and outer sealed ball bearings, drive cup and hex nut for the...

What are yall doing to remove the cvd's from the bearing holders? I have some 7075 holders I want to swap in. I can't heat the square. I sprayed it with penetrating oil & tried tapping it out w/no luck. After breaking a lay shaft & seeing how fragile the metal is I'm concerned about breaking it.

Can someone tell me the bering size for the wheel bearings so i can order some that will last and stand up to some abuse to say. The wheel bearings the ones that always let go the stock ones are just plaine and simple JUNK. I have an awsome bearing shop were i live that makes and designs costum...

Just got my parts fom 7075 and wanted to know if i need to use blue lock-tite when reinstalling screws to nuts? Not sure if there was any when i took them apart. If i don't, any danger screws will come loose?

I once saw a post where someone recommended a place online that sells quality bearings at a reasonable price. I can't find that link anymore. I need to replace one of the upgraded 7075RC wheel bearings. Don't know if it's just a fluke and I got one bad bearing as this is only the second tank...

I have an MT, ive seen where the bearings on the (diff) gear plate seeze up and the melt and break the plate, instead of buying an aluminum plate (trying to stay light), Ill try upgrading the bearings first, looks like it's three, what size do I need to look for??? thanks guys!!!!!! :D

I received my front and rear bearing carriers plus C-hubs along with 8 beefy wheel bearings yesterday. I finally installed everything without issue. The quality of craftsmanship of the 7075 parts is excellent. I have a question though regarding the design of the bearing carriers. I compared...

does anyone know the size of the 4 bushings that are used on the steering post,, wanna replace the bushings with bearings..

The quality of these cars just amaze me. I got the car up an running today after getting my spare parts only to find out all the cages on the wheel bearings have fallen out and every wheel bearing (8 total) are shot. The part that amaze's me most of all is I still haven't made it through my...

how good are they?? and for .99 cents each,,, any better than stock?? thought about getting them for the 7075rc hubs when i finally get them.. 8 bucks for bearings sounds cheap,,, cheap enough to get spares and all the other bearings for car..........

I got my dune runner stripped and the bearings are only a couple months old as I just got in June. I have never cleaned bearings before and wonder if its time to clean them. How often do you guys clean or replace your bearings. Sorry if its a dumb question but I am so confused and don't want to...

hi fellow redcat owners what size are the bearing in the gear plate of the dune runner will a set of 8x22x7 fit in if you could help in any way will be very appreciated thanks

Looking for Hubs back and front+Bearings XSC and any outher part i might need to put them on if they don't fit to the stock parts i have now . Thanks

I got my mt gear plate for my xt and the bearing I got was 1mm thinner what size shins would I need to take out the extra slack ? Please post link if you can

Need to upgrade my #07159 Bearings 19x10x5 I don't have the money to do a complete larger bearing hub upgrade with large bearings yet so for now, all I need to is upgrade my stock bearings here. Any good trusted site with good service and quality bearings?

Has anyone ever tried these ?? I know the 7075rc sets are the best but why are these not a viable option ?

Ok before i buy anymore bearings, i just want to ask to see if anyone has used ceramic. either hybrid with the stainless races or full ceramic. just looking to see if anyone has some experience with running these. If they have lasted forever or been a complete waste of time and money. don't want...