bearings

I've had a friend of mine tell me that this is impossible that the XT plate is much thinner and smaller than the MT. I've been staring and pictures of both the aluminum XT hopup gear plate that uses the normal XT size bearings; 'kinda small" and the MT blue plate, that has much bigger bearings...

Does redcat dune runner have 10x19x5mm bearings? If there is where is it? Thanks

Check this out!! [ame= [/ame] Looks pretty cool. Could be an alternative to pins and set screws. :) I just happened to see this on Youtube when I was looking up 5th scale stuff.

I just installed the 7075 bearing holders and c hubs on my XSC. What is happening is that the rear wheel axle is getting hot in like 3mins just one side passenger rear side. Plus new bearing(from 7075rc) were installed at the same time. What i looked into, The wheels is tight and bearing are...

Just got my new front bearing holders. Fast delivery everything looks great but I thought they were supposed to come bead blasted for that aluminum look. Like in the picture on your website. Mine came black.

What do I need to completely upgrade my XB's wheel bearings? Got at list of what I should buy from 7075 or what so ever?

Can someone post a link of some good aftermarket axle carrier bearings? Thanks in advance

I have found out that the INNER wheel bearing goes out first since there are 2 bearings per wheel axle hub.. My XT's tire started wobbling i knew it was the bearing came home and took it apart the INNER wheel bearing was GONE totally dead but the outer one was totally FINE! So i checked the...

Hello, I just ordered a rampage xb and i have read about axla bearing issues . could you use the MT Carriers,Axles,Axle shafts,sterring knuckles and convert over to a 12mm shaft to use the HPI hubs also would be a larger bearing. Thanks Dave

Just need to know how many bearings i need for gear plate?If possible i need sizes and how many of each?

What is the bearing part # for the MT brake plate piece (The piece with the setscrew for adjusting the intensity of the braking). Can I use my stock XB brake plate's bearing for my MT brake plate piece? Are they the same bearings?

What size bearings do I need for the Aluminum hub carriers on an MT?

I had taken apart all 4 of my Hubs and found this lovely hot mess on one of them goes to show why I will be ordering the 7075rc rear hubs soon.

I know 7075RC makes a nice looking replacement, but before I pull the trigger on those, are there any other alternatives that I should be aware of? Thanks

I am awaiting the arrival of my new truck and am on the prowl for info and upgrades needed , would rather do them then to break down. Has anyone had issues with wheel bearings or bearing hubs that would make sense to replace right away??? Also what should i do with the steering servos and is...

hello i just inspected my xt after two tanks of running it easy to break it in and noticed the wheel bearing are already toasted so i ordered the 7075rc hubs and bearings will these hold up longer than two tanks lol thank you

I have a xsc that developed wheel bearing problems after 1-1/2 tanks of fuel. I see a few posts that mention the problem.I would like to start a list of guys having the problem in all the X models to help better understand the scale of the problem .Was it just a bad batch of bearings in mine and...

Any ideas or are the any better kinds to buy

I came across a few posts that indicate there are problems with the wheel bearings on the XB's. Does anyone know if the failure of the wheel bearing is due to the bearings overheating, or is it because they have a tendency to spin in the steering knuckles? In other words, are the balls in the...

A company in Califorina - www.vxb.com. They have bearing kits for assorted r-c cars, good deals on engine bearings. example- 6001 Nachi open bearing C-3 -12x28x8. $4.88 each. My local Baxter auto parts wants nearly $20.00 each. They have 9 modes of shipping. Information on ceramic materals used...