designed2survive
Senior Member
- Messages
- 1,005
- Location
- MA
First tank done! Already promising! Can't wait to finish break in.
Last edited by a moderator:
Welcome to RedcatRampageForum! Are you a Redcat fan? If so you're in luck as you've have arrived to the biggest and best RedcatRampage RC community.
Come join our community and ask your questions, show off your Recat RCs and share your experience!
Thanks Ice_2k!Ice_2k said:Awesome build!
Ok thanks!phreerider said:pretty quick thru HITEC
Yes. Then there is no conflict between the two with setting them up.Ice_2k said:Meaning two servos working independently?
On my current setup I have made a connecting bar out of 3mm aluminum plate screwed in. So no popping out and it works great. But I think with the future setup (your setup) I'm going to take it out and just have the right servo in charge of the right wheel and the left servo in charge of the left wheel.phreerider said:the connecting bar is going to pop out. i placed a limiter screw over the bar that is adjustable . but it still pops out, i have broken 2 i think, the last time i said forget. with the connector in place its not that hard to set them up , its far from precsion .
for 4X4 drive its gives better control
If I mount the radio box above the second servo, then yes, tight but yes. Making a bracket as we speak.Ice_2k said:Do you have enough space for the 2nd servo?
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Redcat Rampage RC community for Redcat RC enthusiasts that covers all aspects of the Redcat brand!
Register Today It's free! This box will disappear once registered!