G
Guest
Guest
rcgasser is correct. That is a zen housing in your photo. You need a CY or HY housing. I snapped another pic for you. You can see that the Zen carrier is deeper than the CY.ChuenouXiao said:RCdad? Deluge?
Welcome to RedcatRampageForum! Are you a Redcat fan? If so you're in luck as you've have arrived to the biggest and best RedcatRampage RC community.
Come join our community and ask your questions, show off your Recat RCs and share your experience!
rcgasser is correct. That is a zen housing in your photo. You need a CY or HY housing. I snapped another pic for you. You can see that the Zen carrier is deeper than the CY.ChuenouXiao said:RCdad? Deluge?
I new about flywheel cover, good thing I always use a TR clutch housingRCDAD said:When ever you throw a Zenoah in you need to swap the flywheel cover and the clutch housing for it to bolt in properly.
Does this mean I can't use the four original bolts for the clutch housing from OBR onto the HY or CY housing? Do I need the HY and CY bolts specifically or are they the same length and size?RCDAD said:rcgasser is correct. That is a zen housing in your photo. You need a CY or HY housing. I snapped another pic for you. You can see that the Zen carrier is deeper than the CY.
You sure Rcdad?RCDAD said:The bolts will be fine.
You're always my savior Rcdad... thanks bud!RCDAD said:Yep...I've never had a problem with the hardware.
Or bust out my Elcon after replacing the housing?RCDAD said:Agreed.Just to save yourself some headaches, I'd start with a new clutch and bell.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Redcat Rampage RC community for Redcat RC enthusiasts that covers all aspects of the Redcat brand!
Register Today It's free! This box will disappear once registered!