engine

So I'm having issues with my motor, when I pull the pull start it pulls lose and don't move the piston, this is my first Rc so I don't know much, I've take it apart and nothing seems yo be broke, that I can tell off

Has anyone not been able to start their rampage xt right out of the box? I had to screw all my carb needles in and then back them out 1 1/4 turn just to fire the thing up!!! At first I didn't think to do that because I was under the impression it was ready to go but it wasn't

I'm sure this has been done to death, but I'm going to ask anyway. Would the long block be an option you would consider? ORB has new cnc billet platforms... Sounds enticing What's your take on an effective power plant that's going to couple with a two speed. Im even considering changing...

I have a question and need some help. I start my Rampage and its runs great for about 10 minutes. Once it warms up it stalls. The tank is vented, I even put a vented gas cap on to make sure it wasn't vapor lock. Any thoughts on my issue? (Stock carb BTW) I know what you're going to say about...

I bought a Redcat Shockwave which comes with VX .16 stock. If I'm not mistaken I can mount a SH .18 to it? Can I use the clutch assembly from the original motor? Would the stock exhaust manifold work with the SH .18? Any other things I should consider when doing this? Thanks! :D

https://www.google.com/url?sa=t&rct=j&q=two%20stroke%20tuning%20guide&source=web&cd=1&ved=0CCsQFjAA&url=http%3A%2F%2Fwww.amrca.com%2Ftech%2Ftuners.pdf&ei=g5b3Ue7ELYi88ATI_oCYDA&usg=AFQjCNFwMFuZ2ja58wF9ozRZ9VqG6aC7UQ&bvm=bv.49967636,d.eWU It's been some years ago, but this book was loaned to me...

Hi, Is there anything you have to do when starting the engine for the first time on a Redcat Rampage? The reason I say that is yesterday, we started the Truck engine but before, I pump the primer bulb a few time (3-5 times) until I saw the fuel in the bulb. After, I Open the choke and give...

I'm having some issues with my trucks idle. It seems that it idles really high after I let go of the throttle after a big acceleration, enough to keep the truck moving on its own for 10+ feet, then it will drop down to normal idle. Even at a stand still the RPM's will vary from low to high,then...

Just put the jetpro side pipe on my xb, AWESOME, however I backed off my needle settings cause it was running like a raped squirrel! But it's making me wonder what the max temp ( or highest performance level) is on the 30cc , if I'm correct just like a nitro about 220 degrees. Also where on your...

Just got a new Rampage MT and i need some advice. Should I break in the engine with the stock equipment or can I add a Jetpro exhaust and hpi air filter and then start the break in?

I have an HY 30cc Fuelie that will start up but will not run. I've ran 2 gallons through it, and i wasn't haveing problems until now. When it idles the RPM's will go up and down, and won't stay at a certain RPM. It will also die when it gets up to speed and I apply the brakes. It also has...

Certan you all have been reading the news lately. Sayy- bet you had no idea that the microphone on your cell phone could be turned on remotely even if the user had the phone turned off-- itp of the iceburg dudes. Anyways, check this place out-- www.startpage.com These people will also be...

does any one on here no if an zenoah engine case is the size F270 4 Bolt Crankcase please let me no thanks and will the crank and all will work and fit right....

Hi guys might sound like a really stupid question but here goes, I have I think v2 rampage with the square drive main cogs, but what is the cc of the engine as I think it needs re ringing slight loss of compression , just wanted to order 1 before I strip the engine , also are the standard rings ok

Hello, My Rampage MT was running fine stock and would start within 3-4 pulls. Well in hopes to get a little extra performance I installed a ZRC tall manifold and shread stack. Now I have to put my hand over the intake to even get it to start. Once it is running, it idles extremely high...to...

I tried searching the web and here on the forums but cant find anything that answers my question. what brings this question up is a F/S thread on another forum where a possible purchaser backed out of the sale, he thought the engine was a 4 bolt, because the seller had purchased an expensive...

What is a the spec for engine temperature??

Hi guys, my dunerunner engine is giving me too many headaches and i would like to replace it, i found the HPI Baja 5B SS Fuelie 26cc Engine for just 100 buck new on ebay, would it fit the dunerunner??? If not, can someone tell me of any cheap engine that fits? Thanks!

So I don't know what caused this but I fired up the MT today it ran for about 30secs then shut off went to start it again and it was stuck pulled the engine apart and this is what I got, lol. If anyone has any ideas on what could've caused this please do share, also would it be better just to...

Hi everyone, Just got a new DuneRunner today and I'm going thru the break in process. I ran it idle for 30 minutes and after that started to drive it slowly around the house (20:1 mix) and it seems that when I get to about half thank, the engine seems to be running out of gas for a 30 second...