Deluge
Senior Member
- Messages
- 7,900
- Location
- Tucson, Arizona
That XB body looks a hell of a lot better than the stock body.
Welcome to RedcatRampageForum! Are you a Redcat fan? If so you're in luck as you've have arrived to the biggest and best RedcatRampage RC community.
Come join our community and ask your questions, show off your Recat RCs and share your experience!
Their not available yet. I belive he is going to offering some great deals to forum memberswhere do i pay for it .... can't wait for the xb-e body
I got a yellow wing from the factory. I think the only other person I know of to have one is Rob64. Ali did some pre release videos with the same old body as the one I got but he still got a black wing.strodedawg said:anybody find a nice white wing for xb/xb-e?
---------------------------------------------------------------DemonRC said:Grafil, I checked around between Zippy, Gens Ace, Blue, Sky, and Turnigy 6s lipo packs and the max height I found was 73.5mm. Add about 6mm for the battery tray and velco straps. Pretty much that's about 80mm height on each side that the body has to clear. I took your drawing and scaled it in AutoCAD to figure out some dimensions. Most 6s lipos will be under the 70mm height mark but some will need to be at the 80mm mark. Also, I've offset the baseline measurements by 4mm for the chassis thickness already so that doesn't need be be figured into the measurements.P.S. The dam JPEG compression screwed up the text for the battery heights. The measurements are 60mm, 70mm, and 80mm.
Oh, I did notice that the large intake ports by the front window are prefectly in line with the batteries. That's a nice feature.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Redcat Rampage RC community for Redcat RC enthusiasts that covers all aspects of the Redcat brand!
Register Today It's free! This box will disappear once registered!