It has been a while, but I have been working on a few things on my MT. Last time I was out bashing the MT it took a fall on the top of the roof from about 10’. I damaged my roll cage and damage the spark plug. So I have been working on a new cage, based on my previous design but with better cross bracing and instead of using steel rod I used some 4130. I am also converting it into a TT for use at the track. I got an MCD RR body and I don’t want to cut the side of it so I am also working on fitting a VRC pipe to the rear of it. Here are some roll cage pics of the damaged V1 compared to the new V2.
View attachment 1893
View attachment 1894
View attachment 1895
View attachment 1896
View attachment 1897
/monthly_2009_09/P8280004.JPG.e4b7a875b1eb8c5c0da7f8fb8b5b5a06.JPG
/monthly_2009_09/P8280001.JPG.28620045532581bbfd4abce2164361dd.JPG
/monthly_2009_09/P8280002.jpg.1fe185f8aa8ba09b88e11d891bc6185d.jpg
/monthly_2009_09/P8280008.jpg.07454212c4104be947e34c46f632da44.jpg
/monthly_2009_09/P8280012.JPG.d53355e398a82b427846cf1b672c1b17.JPG
/monthly_2009_09/P8280004.JPG.e4b7a875b1eb8c5c0da7f8fb8b5b5a06.JPG
/monthly_2009_09/P8280001.JPG.28620045532581bbfd4abce2164361dd.JPG
/monthly_2009_09/P8280002.jpg.1fe185f8aa8ba09b88e11d891bc6185d.jpg
/monthly_2009_09/P8280008.jpg.07454212c4104be947e34c46f632da44.jpg
/monthly_2009_09/P8280012.JPG.d53355e398a82b427846cf1b672c1b17.JPG