Welcome to RedcatRampageForum! Are you a Redcat fan? If so you're in luck as you've have arrived to the biggest and best RedcatRampage RC community.
Come join our community and ask your questions, show off your Recat RCs and share your experience!
I use the ddm racing dominator side mount pipe. It seems good all around power. Love the sound too. Not sure it is better than the jetpro rear mount, never had one on a MT. I do have a jetpro on my Dunerunner though. Totally different sound and seems to have alot of low end torqueI have a rear jetpro for my Rampage MT, is there another pipe that gives more power that the jetpro pipe? I have the rest covered.
I use this high temp silicone hose from amazon using zip ties instead of the hose clamps.What coupler are you using on the jetpro pipe? The stock silicone hose that came with the hose is melti g and deteriorating , what else can i use for the coupler that can withstand the heat?
have a pic to show?I use this high temp silicone hose from amazon using zip ties instead of the hose clamps.
https://www.amazon.com/gp/product/B005B00FAY/ref=oh_aui_detailpage_o04_s01?ie=UTF8&psc=1
View attachment 14097 Man I don't have a close up, but that is the hose I linked you on the Jetpro in the Dunerunner there
Looks good brother, ordered that hose, mine measured ID just short of an inchAhahahaha! It didn't last long!! View attachment 14098
It is a tight fit I'm not gonna lie, but not too tight it won't go on. As gross as this may sound, a little spit put on the inside of the hose you cut makes the installation much easier. I didn't want to use silicone, it would make the hose slip. Lol I don't know it worked is all I can say. So I just barely replaced my first piece a year later only because I was taking the pipe off for the new head kit. It didn't melt, it did have a few cracks inside though.Looks good brother, ordered that hose, mine measured ID just short of an inch
It is a tight fit I'm not gonna lie, but not too tight it won't go on. As gross as this may sound, a little spit put on the inside of the hose you cut makes the installation much easier. I didn't want to use silicone, it would make the hose slip. Lol I don't know it worked is all I can say. So I just barely replaced my first piece a year later only because I was taking the pipe off for the new head kit. It didn't melt, it did have a few cracks inside though.
As funny as it sounds it worked. I was struggling with it dry, a little spit and bam slipped right on hahahahaha!!!I didn't use lube for the same reason.
Didn't think of spit damnit
As funny as it sounds it worked. I was struggling with it dry, a little spit and bam slipped right on hahahahaha!!!
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Redcat Rampage RC community for Redcat RC enthusiasts that covers all aspects of the Redcat brand!
Register Today It's free! This box will disappear once registered!