want to buy a supplied dual servo mod kit for mt ??

[aussie]

hi guys


how ya going


glen again here from oz


im keen and interested in buying from some one if possble of here a modded design dual servo mount type to suit rampage mt.


i will pay extra cost on top of cost parts ,plus shipping if some one can please supply,mod and make me up a dual servo system so all i have to do is fit it all to my mt.


i know some of you smart fellas have made up dual servo mounts and its out of my league...


can any one please help me ??


name your price what you want for a dual servo mount kit complete ready to go ??


i wanted to use the hitec 5745 model !!


please pm or email me at [email protected]


hope some one is willing to please help me.


btw,i can send electronic money via western union money order up front before hand so you are not out of pocket,no probs


cheers


thanks


glen


Australia

 

[RampageHopUps]

Redcat should have them available soon. I jsut need to see if they have them in stock or by piece part.

 

[aussie]

hi rob


how are ya


thanks for the reply.


so any dates and prices yet please then ??


will be able to use the better 5745 servos as well with it ??


gees i was hoping one of the other guys here that has up graded them selves might of offered to help me but no luck...


thanks


glen

 

[aussie]

hi mate


how are ya.


thanks for your reply.


nah im after the whole assmebly,brackets,wiring,servos,batt box,servo arms/turn buckles,the lot,every thing needed to convert over.


iv seen some pics of what some guys have done on here,looks great.


can some one please help me out ??


cheers


glen

 

[aussie]

so guys,


what is the complete list of parts i need to make this dual servo steering conversion happen please ??


cheers


glen

 

[aussie]

hi mooman


how are ya.


wow thanks for the pics,reply and advice


much appreicated mate.


so what wiring,plugs do i need to buy please ??


what dimension alloy rite angle plate do i need to buy to suit hitec servos size ??, looks 30 mm x 30 mm ? and how long ??


i don't have these hi tec servos yet thats all.


iv located the 50012,50056,06540 batt fg box for prices,cheap hah,cool.


so i will get them this week.


i think i should be able to manage to be able to do this upgrade.


im very happy you took the time to help me...


cheers


glen

 

[aussie]

so what wiring/plugs do i need to buy and add for this upgrade ??


and what is the dimension for the hitec 5745 servo for the alloy bracket i need to make ??


can i still put battery in fg box??


mooman,do you have any pics for the other side rhs for the other servo for throttle/other steering side ??


thanks


glen

 

[kryptonite]

-you are going to need a spiltter or Y-harness for the two servos


-the fg box is for the reciever. battery wont fit in there so the battery bust be taped to the chassis


-and do yourself a faver. don't cut anything or drill holes untill you have that servo


-also, you know that redcat makes the dual servo conversion right? its just a matter of time before it hits the shelves.. good luck

 

[Sprint 77]

another note, I Ran the ABC 123 style lithium ion batterey all day yesterday and left it on to set all the new Radio settings and charged it back up at only 450 mah so even thoug they are only 1400 mah their 65 c amp draw rating is more than sufficient for three high drain digital servos. at 1/4 of the weight and very small package for getting more room with dual servos.

 

[aussie]

-you are going to need a spiltter or Y-harness for the two servos
-the fg box is for the reciever. battery wont fit in there so the battery bust be taped to the chassis


-and do yourself a faver. don't cut anything or drill holes untill you have that servo


-also, you know that redcat makes the dual servo conversion right? its just a matter of time before it hits the shelves.. good luck

hi mate


thanks for your info and reply also.


so do i buy the a 6" or 24 " y- harness length ??


is twisted or straight better ??


yep ok,i wont drill or cut till i get servos.


yeah i don't want to wait to get the servos happening,iv got no patience ,lol!!


cheers


glen

 

[aussie]

hi sprint


how ya going.


the batt sounds good.


how much are they ??


any pics of it ??


cheers


glen

 

[kryptonite]

the 6" Y-harness is more then enough

 

[aussie]

ok cool,thanks


cheers


glen