xscrick
Banned
- Messages
- 172
- Location
- near green bay wisconsin
got the steering posts from nuttech, the ones for the tb3,, I think they are all the same though,,, seem to work, ,bolts are one size smaller than what is used for the stock bolts,,, same bolt size as most of the smaller redcat bolts though ,,,bolts right up,, close to same height as stock,, will need to get a spacer or I used some washers to get height right so steering clears suspension mounts,, uses more common 6x10 bearings,, and the posts were under 6 bucks,, and bearings were 4 bucks,,,once get height right with a spacer, ,, and get some 6x10 shims for the bearings, are 3mm thick, not 4mm like the bushings,, u will have bearings in your steering with no drilling
Last edited by a moderator:
