Clubin
Banned
- Messages
- 1,054
- Location
- Manitoba, Canada
Prety good considering the price.
My engine fit without any problems, the FG can won't fit if any one is wondering. It hits the back roll cage.
I put about 1/2 tank through it this evening. Seems good, it realy needs a pipe, my machined and ported ONB does not like that can! I am also running a 7500 DDM spring.
I had to vent the tank, that crazy check valve thing just doesn't work, it was pressurizing the tank and flooding the engine.
The HS 5745 fit perfect, I used the top holes and drilled the bottom ones out to mount the servo. I used a ACE 1015 for t/b that one fit perfect too, I used the supplied t/b horn, it is the same spline count as the ace.
One thing I noticed is it is geared very high, and it goes like stink once it has a bit of time to open up.
I think I am going to get a HPI Baja 5T body for it, the stocker doesn't do anything for me. lol
It is neat the way the car is made tighter and the rear drive shaft is on a angle. I think it would take a bit of work to get it to be 4x4.
I am happy with it so far.
I am not advedrtising any more for free. lol
My engine fit without any problems, the FG can won't fit if any one is wondering. It hits the back roll cage.
I put about 1/2 tank through it this evening. Seems good, it realy needs a pipe, my machined and ported ONB does not like that can! I am also running a 7500 DDM spring.
I had to vent the tank, that crazy check valve thing just doesn't work, it was pressurizing the tank and flooding the engine.
The HS 5745 fit perfect, I used the top holes and drilled the bottom ones out to mount the servo. I used a ACE 1015 for t/b that one fit perfect too, I used the supplied t/b horn, it is the same spline count as the ace.
One thing I noticed is it is geared very high, and it goes like stink once it has a bit of time to open up.
I think I am going to get a HPI Baja 5T body for it, the stocker doesn't do anything for me. lol
It is neat the way the car is made tighter and the rear drive shaft is on a angle. I think it would take a bit of work to get it to be 4x4.
I am happy with it so far.
I am not advedrtising any more for free. lol