MCD Cheetah wheels and tires?

[jonathan13]

I was looking through some older threads and found some pictures of the MCD Cheetah wheels and tires, and they look incredible. But, I am unable to find them anywhere. Anyone have any idea where I might be able to find these bad boys? From what I read they are around the same size as MT wheels and tires, but half the weight.

 

[Guest]

I'd give them a call to see if they will be getting more in. http://www.largescalerc.com/011201x0-monstertireandblackwheelassembled220mmqty2.aspx

 

[jonathan13]

Yeah I think contacting a copy who does sell them is probably going to be the only option.

Right now the top wheels and tires in the running for me are:

For show and bling

http://www.kingmotorrc.com/New_King_Motor_T2000_Truck_All_Terrain_Wheels_Tire_p/km102.htm

For pavement

http://www.kingmotorrc.com/Buggy_Rear_Road_Tarmac_Wheels_on_Poison_Rims_p/km122r.htm

For dirt and off road

http://www.kingmotorrc.com/New_King_Motor_T1000_Rear_Knobby_Truck_Tires_Wheel_p/km50r.htm

OR

http://www.rovanrc.com/Buggy_Knobby_Rear_Wheels_on_6_Spoke_Rims_set_of_2_p/rv85038-2.htm

As you can tell I have been living and breathing wheels and tires for the last 24 hours. I have about 4 or 5 more sets that I am also looking at. SO MANY options once I switch to 24mm hex. Muuhahahahaha(Dr. Evil laugh)

 

[crazyfast]

Here's what the KM T1000 looks like on my XT. They're about 7.5" tall and are actually my favorite tire so far. Haven't really had a chance to truly test the J-7's. I just put thinner red bead locks on them and really makes the wheels look a lot better. Not really a big fan of those wider bead locks.

 

[jonathan13]

Are those fronts or rears? They look less wider than I had imagined on a Rampage.

 

[Guest]

Looks like fronts in front and rears in rear.

Here is a Trencher compared to the MT tire.

 

[jonathan13]

Wow those are much skinnier width wise than I realized.

 

[Guest]

That is the rear Trencher also. The fronts are a bit narrower.

 

[jonathan13]

All Cheetahs and their wheels have been discontinued They are gone forever.

 

[JohnCHarris]

Where can I get the trencher rear tires? And what do I need to use on a MT. Also RCDAD where did you get the short course body for mt?

 

[carp boyz]

Where can I get the trencher rear tires? And what do I need to use on a MT. Also RCDAD where did you get the short course body for mt?

DDM most likely has the trenchers in stock and you'll also need some wheels/rims for them, as well as some hpi stock rear hex hubs,I believe vertigo also carry a version

 

[Guest]

Where can I get the trencher rear tires? And what do I need to use on a MT. Also RCDAD where did you get the short course body for mt?

My MT has the discontinued Asguard SC body. These fit the MT. http://www.rcpitstop.net/proline-bodies.html

 

[Ludabud]

Looks like fronts in front and rears in rear.Here is a Trencher compared to the MT tire.

What do the boe tie tires/wheels look like next to the stock MT tires/wheels?

 

[rampage idiot]

My MT has the discontinued Asguard SC body. These fit the MT. http://www.rcpitstop.net/proline-bodies.html

How well does it fit the MT? And do you have any left, cause I really don't think Grafil is going to come up with an MT body any time soon!

 

[Guest]

We only have a couple left, as they are discontinued also.

Mounted to a MT...

 

[rampage idiot]

We only have a couple left, as they are discontinued also.Mounted to a MT...

WOW looks good! are the post holes already in it? If they are NOT pm me an invoice shipped to PA. Thanks Brian

 

[claude bigelow]

Those bodies are nice!!

 

[xsocruz]

I was looking through some older threads and found some pictures of the MCD Cheetah wheels and tires, and they look incredible. But, I am unable to find them anywhere. Anyone have any idea where I might be able to find these bad boys? From what I read they are around the same size as MT wheels and tires, but half the weight.

Ive owned a MCD Cheetah V4 with the MT tires. Yes, they are awesome. Weight seems to be the same as my new Maverick MT v3.

Anyways, you can get them here in Australia -

http://www.powerslideracing.com.au/monster-truck-tyres-on-black-rims-v4-220mm-pair-011201x0.html

http://www.powerslideracing.com.au/monster-truck-tyres-on-white-rims-v4-220mm-pair-011202x0-en.html

-X

 

[Ildy666]

Cool lookin ride....

 

[xsocruz]

Cool lookin ride....

Yah it was a very good truck with RCMK 29F engine & samba pipe. Sold it to buy dual suspension mountain bike 2yrs ago. Now Im back to playing 1/5 scale again.