hamster huey
Well-Known Member
- Messages
- 1,372
- Location
- Wichita
My list again. Im stickin to it.
Basic hopups for fun+reliablilty
1.Remove gear cover (see #3 below)
2.Steering servo / throttle servo
3. Pipe (a good one will even wake up a 23cc)
4. 3rd channel kill switch
5. 2.4ghz radio
6. 8k clutch spring
7. HPI baja air filter
8. head kit (3.5 or less HP, easier on drivetrain)
9. Receiver batt (at least 3000mah)
10. pull start cover
11. dogbone leashes (so you don't chuck a bone)
12. centered driveshafts
13. shoe goo, flat scrap lexan, dry wall tape or equivalent (body repair)
Areas that might need attention in the future
1. bearings
2. shock shafts (breakage,limiters, droop, etc)
3. gears (steel if needed, many of us don't need them, see above #1)
4. wheels,tires (lighter=faster,maybe less drivetrain/susp. wear and tear (esp. mt))
5. slammer dam or equivalent
6. upgrade kit (has lots of spares and beefier parts)
7. differential (hardened, or #6)
8. outdrives (hardened)
Basic hopups for fun+reliablilty
1.Remove gear cover (see #3 below)
2.Steering servo / throttle servo
3. Pipe (a good one will even wake up a 23cc)
4. 3rd channel kill switch
5. 2.4ghz radio
6. 8k clutch spring
7. HPI baja air filter
8. head kit (3.5 or less HP, easier on drivetrain)
9. Receiver batt (at least 3000mah)
10. pull start cover
11. dogbone leashes (so you don't chuck a bone)
12. centered driveshafts
13. shoe goo, flat scrap lexan, dry wall tape or equivalent (body repair)
Areas that might need attention in the future
1. bearings
2. shock shafts (breakage,limiters, droop, etc)
3. gears (steel if needed, many of us don't need them, see above #1)
4. wheels,tires (lighter=faster,maybe less drivetrain/susp. wear and tear (esp. mt))
5. slammer dam or equivalent
6. upgrade kit (has lots of spares and beefier parts)
7. differential (hardened, or #6)
8. outdrives (hardened)