Convert MT to Single Servo

[JB RACER]

Can anyone tell me what I need to convert my MT to single steering servo


Thanks

 

[Sergio]

http://www.davesmotors.com/redcat-50006n-battery-receiver-case.html

And part 050014 single servo saver

 

[Deluge]

What servo do you plan on running? 5765 or a 5805?

I ran a single 5805 with great results. I just installed the aluminum servo mount and it bolted right up.

Aluminum Futaba Servo Mount

You don't have to buy the rack with the single servo saver, just lock down the servo saver you're not using and you're good to go. The battery box is optional. It has room for larger batteries, including LiPos, if you ever want to run one.

 

[rampage idiot]

What servo do you plan on running? 5765 or a 5805?I ran a single 5805 with great results. I just installed the aluminum servo mount and it bolted right up.

Aluminum Futaba Servo Mount

You don't have to buy the rack with the single servo saver, just lock down the servo saver you're not using and you're good to go. The battery box is optional. It has room for larger batteries, including LiPos, if you ever want to run one.

+1 same for me, works great!

 

[JB RACER]

I have the hitec 5765 and killer rc battery 7200mah 7.4 lipo that I bought a while back and wanted to use

 

[Sergio]

I have the hitec 5765 and killer rc battery 7200mah 7.4 lipo that I bought a while back and wanted to use

That's why you need the box I linked

 

[JB RACER]

Will that be all I need to complete or do I still need the Futaba mount ?

 

[Sergio]

Will that be all I need to complete or do I still need the Futaba mount ?

You don't have to I have the same servo and only had to drill new holes

 

[JB RACER]

Thanks for all the help I know what my next project is !

 

[Blackout]

What's the performance like single vs dual servos?

 

[Guest]

A decent single servo will perform as good or better than the 2 stock unites. A single unit is always easier to set up.

 

[ika]

Going to replace stock steering servos, too sloppy .

do I need 2 HS-5805MG or single is enough?

 

[ika]

Going to buy today, can someone answer ?

Is it direct fit or some modification and other parts needed?

Thanks

 

[Ice_2k]

What is wrong with the stock dual setup that makes you want to change to single servo?

 

[ika]

Too sloopy , hard to drive strsight

 

[designed2survive]

Too sloopy , hard to drive strsight

If you are having issue with going straight

1- you may have a worn out servo horn

2- the steering linkage may have not been setup properly

3- you may have too much side play in your steering linkage

 

[Ice_2k]

Going to replace stock steering servos, too sloppy .do I need 2 HS-5805MG or single is enough?

Did you ever get around to changing the servos? If so, which setup did you go for?

 

[ika]

I got tgy-1270HV servos.

Quality is good, but slow.

Linkage is best, I made some mode and my linkage is tight.

I will post pics, when I have time.