fuel

So my MT just started to idle high, From what I have inspected it looks as if the base gasket is hanging out a little suspecting me to believe it blew out (these things come with such cheap plastic gaskets) I'd like to know if it is indeed a blown base gasket, would that cause the high idle I...

I just got an XT used with a 26cc engine but the base gasket is blown, I ordered the parts from DDM, I am more then capable of doing this repair, I just don't know where to start, I have the engine removed and ready to go, I just need some instructions... As always any and all help is very very...

I am in need of a new exhaust gasket for my 30cc fuelie engine and a base gasket for a 26cc fuelie engine.... I tried a google search for "parts" and nothing promising came up. I'd like to order these parts for my engines... As always, any and all help is greatly appericated! Thanks, Keith

Would anybody know the optimum rpm range if running a walbro 813 and ddm dominator?

Here's a pic in case anybody was wondering what it looked like. It actually spins on much smoother than the plastic one. Also, the interior rubber part doesn't fall out all the time.

like on the 30cc engines like maybe 100 octane???

How do you guys refuel your r/c's? I picked up a 1 gallon jerry can, but i think that will be a pain to refuel with. I was looking into products like the Flo n' Go and other syphoning products. The Flo n' Go looks like something I'd like to have, but people have given it bad reviews, poor...

Anyone know where to get a fuel tank for the dune runner 4X4 , I bought one off of rampage hopups and they sent me a 2X4 tank , emailed them back and they said would be a couple of weeks , have not heard anything back from them so , wont deal with them again. cant find any thing. If anyone has...

Does oil/fuel residue mean the carbs are set too rich? It's not dripping or running off the body. Just enough to wipe off.

I just picked up a 29cc fuelie from a baja 5t on ebay for $90 ($80 w/$10shipping). It has the 8000 rpm clutch, 17T pinion gear,clutch bell and mount, pull-start, fan cover, engine stop switch, spark-plug and coil, engine cover, stock carburetor and muffler with tube. Supposedly only two...

i was running today and noticed i had a fuel leak. its seeping out from around the rubber plug that the hoses go thru. not out out the hose holes but around where the plug and tank seal. anyone running into this? fixes?

Main line keeps coming out after a few minutes. I'm gonna try to tie wrap. Any other suggestions?

in case anyone was wondering i just reversed the fuel tank so the cap is on the pull starter side now. makes it a whole lot easier to fill now with the tuned pipe not blocking the cap. I havent ran it yet but it does seem to fit fine.

I hadn't even started her yet and I installed the 813 with Shredstack and HPI filter... Is there a way to change the direction of the fuel jets? They are angled completely different than the stock. I had to pull the lines up through the tank a good inch or so to connect them. My guess: is...

Rampage manual says to use 75% fuel and then 25% oil So basically 42 oz oil per each gallon of fuel right?

I lost one of my fuel caps and don't have a spare. Id like one from a v3 but any would do.

I know I read a thread or post on here but Ive spent the last 20 minutes looking and cant find it. It would help if I could remember who it was but I cant. It was the pick up fuel line relocated to dual lines drilled into holes at both corners of the bottom of the tank if I remember right. That...

Do the FG alloy and plastic caps work on the Ramp and do they vent properly with no spills it the Ramp flips? It would be a clean looking install.

OK, I got my 813 installed and running but I noticed that the intake fuel line at first had a bunch of tiny bubbles. As I drove it longer the bubbles got bigger. My return line is new and half of my intake line is new(the half after the fuel filter). The other half is the one that comes...

This will be intersting. I could only put 10 choices so this is it.