V Stack/ Air Filter Setup for the MT V3

[XDEEDUBBX]

Looking to purchase a Vstack/Air filter setup for my MT v3 30cc. Which vendor carries it or which one will work with my motor? Thanks


Bryan

 

[Deluge]

This is what I run.

ADA Billet RC / CY Intake Manifold

TeamPhatDad-RC Inclined ShreadStack (Velocity Stack)

Air Filter Set

Outerwears Airfilter Pre-Filter

The ADA manifold is optional, but the stock manifold will eventually crack and create an air leak, so it'd be good to upgrade while you have the carb off. Also, it includes Teflon gaskets, which are reusable.

 

[XDEEDUBBX]

quite a setup you got there! Is there another option out there that is a little more cost effective lol..

 

[Bill_G]

IMO the the manifold is a good idea. This is the manifold I run. Shreadstack not needed if you cross the linkages. The Baja filter kit is the way to go. Cheap prefilter for airfilter and pullstart here too.

 

[XDEEDUBBX]

ok I think im sold on that ada billet manifold. thanks guys

 

[Keith81]

I use a boost manifold...

http://www.boostinductionsystems.com/bis-racing_home_059.htm

 

[XDEEDUBBX]

Keith, does it still need an adapter or v stack after the manifold for the filter to go on?

 

[Deluge]

For which filter? The Baja filter assembly will bolt on without an adapter.

 

[XDEEDUBBX]

If I installed your setup will it take away my choke? Please excuse my ignorance, im currently at work and don't remember if the choke was built into the manifold or on the motor.

For which filter? The Baja filter assembly will bolt on without an adapter.

 

[Deluge]

The choke is built into the carb. You won't lose it.

 

[XDEEDUBBX]

HAHA ok, I haven't had much time to tinker with it so I couldn't remember where the choke was placed. Thanks for the help.