Welcome to RedcatRampageForum! Are you a Redcat fan? If so you're in luck as you've have arrived to the biggest and best RedcatRampage RC community.
Come join our community and ask your questions, show off your Recat RCs and share your experience!
I witnessed MoFroggy truck first run over at my shop. I agree that servo is noisy. Rob said the servo was slow , but strong . So knowing that MoFroggy put his linkage on the top hole for more travel per degree which will help the speed. I would not advise this if you are running a radio without "EndPoint Adjustmenst" most time is "EPA" on the screen of most brands. Turn you servo all the right (I Think it is right MoFroggy correct me on this if needed) and then back down the # on your steering EPA until the linkage doesn't foul against the servo mount.MOfroggy said:I noticed the same noise and also that when I steered left the linkage hit the side of the servo mount bracket, do you see the same thing on yours?
MOfroggy
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Redcat Rampage RC community for Redcat RC enthusiasts that covers all aspects of the Redcat brand!
Register Today It's free! This box will disappear once registered!