Fearless
Well-Known Member
- Messages
- 279
- Location
- Cape Cod-MA
Close to $4,000 on this Would like to get $2,500 shipped.
30.5 cc Pro stock engine, OBR top end $135 gizmo bottom $235 freshly rebuild not even a tank on it. Engine rated at 5.5 hp
Walbro WT 990 carburetor $ 38.99
ADA billet intake manifold $ 21.99
Dt1 dual flow air filter $ 17.00
Tgn air filter outerwear $ 17.00
Killer RC 7200 maH 7.4v lipo battery $ 58.99
Killer RC super bee fail safe switch $ 69.98
Killer RC super power switch $ 32.99
Fly sky gt3b 2.4g 3 ch transmitter $ 54.98
DGI steering links head duty $ 42.99
Aluminum hop ups
Roll cage $ 35.99
Front lower arms $ 69.99
Front shock tower $ 22.99
Servo saver $ 39.99
Front upper top plate $ 32.99
Front upper arms $ 37.99
Center differential mount $ 34.99
Rear shock tower $25.99
Rear lower arm $ 69.99
Rear upper link $ 55.99
Rear brace set $ 39.99
Steering servo mount $ 39.99
MT aluminum gear plate with K lay shaft $ 81.99
MT aluminum front shock $ 61.99
MT aluminum rear shock $ 61.99
XB aluminum wing mount set $ 49.99
2 front TBR bashing bumper (front and rear) $ 48.38
Team fast eddy bearings $ 25.00
7075 RC upgrades
Rear bearing holder $ 45.00
Front bearing holder $ 40.00
C- hubs $ 75.00
Front and rear differential housing $ 205.00
Raw aluminum $ 150.00
Threaded hpi wheel adapters $ 66.00
Rovan on road wheels and tires $ 99.99
King motor aluminum beadlocks $ 49.99
DDM enclosed wheel nut $ 29.00
DDM aluminum gas cap $ 18.00
Snappy fuel kit $ 17.00
Flow system pipe by Erick hill $ 275.00
Hpi boots $ 12.00
Outerwear pull start $ 19.99
Outerwear crankcase/flywheel $ 19.99
Shock wear $ 10.00
Chili racing belt drive kit $ 129.00
NGK cmr7h $ 2.79
Hitec 5765mh steering servo $ 73.99
Alloy servo horn $ 5.99
Hitec 7955tg high torque titanium throttle/brake servo $ 94.95
Integy alloy servo horn $ 7.00
Rc screwz kit $ 59.95
OBR wing wrap $ 14.99
Turtle racing HD clutch case $ 51.00
Total of $ 3,132.75 only in upgrades
Rampage Xt priced at $ 569.99
Basically total of $ 3,702.74 to build up one like this if you are a regular person like me and not a dealer and off course this is only truck price and parts price prob 4k for shipping parts ever thing.
Done by me
Painted body, nothing professional but it looks cool
I did tempered all differential cups and re enforce with a 3/4 type L cooper pipe small rings
Did limiting arm cables
Install small electrical box I believe from the xb-e for receiver and killer bee switch, so trouble free and no hassle to remove or place battery. Nice and neat.
All assembled with properly thread lock.
So back to the subject not really need to sell but to many rc's around the place...lol...more toys than my kids and wants free up and make more space. Pretty soon will list my xb.
This truck is nice is nasty and powerful, very fast trouble free drive as it should and you most have some throttle control because she turn out to be a beast and engine is not even break in yet so you will have to finish that. Other than that is RTR inly need gas and rock roll, currently I have on road tires on it, what you see in pictures is what you get.
She is not brand new but is close as is can get small dings here and there for little usage on small hole on frame, one screw broke it at the cage (super easy fix) but other than that is perfect body looks good and descent basically as said thing looks new and barely used.
Fell free to contact me for further questions.
Ships only to lower 48.
And as you most know due to the nature of our hobby is sold as is, so please make all questions necessary before you purchase this.
Thank you
30.5 cc Pro stock engine, OBR top end $135 gizmo bottom $235 freshly rebuild not even a tank on it. Engine rated at 5.5 hp
Walbro WT 990 carburetor $ 38.99
ADA billet intake manifold $ 21.99
Dt1 dual flow air filter $ 17.00
Tgn air filter outerwear $ 17.00
Killer RC 7200 maH 7.4v lipo battery $ 58.99
Killer RC super bee fail safe switch $ 69.98
Killer RC super power switch $ 32.99
Fly sky gt3b 2.4g 3 ch transmitter $ 54.98
DGI steering links head duty $ 42.99
Aluminum hop ups
Roll cage $ 35.99
Front lower arms $ 69.99
Front shock tower $ 22.99
Servo saver $ 39.99
Front upper top plate $ 32.99
Front upper arms $ 37.99
Center differential mount $ 34.99
Rear shock tower $25.99
Rear lower arm $ 69.99
Rear upper link $ 55.99
Rear brace set $ 39.99
Steering servo mount $ 39.99
MT aluminum gear plate with K lay shaft $ 81.99
MT aluminum front shock $ 61.99
MT aluminum rear shock $ 61.99
XB aluminum wing mount set $ 49.99
2 front TBR bashing bumper (front and rear) $ 48.38
Team fast eddy bearings $ 25.00
7075 RC upgrades
Rear bearing holder $ 45.00
Front bearing holder $ 40.00
C- hubs $ 75.00
Front and rear differential housing $ 205.00
Raw aluminum $ 150.00
Threaded hpi wheel adapters $ 66.00
Rovan on road wheels and tires $ 99.99
King motor aluminum beadlocks $ 49.99
DDM enclosed wheel nut $ 29.00
DDM aluminum gas cap $ 18.00
Snappy fuel kit $ 17.00
Flow system pipe by Erick hill $ 275.00
Hpi boots $ 12.00
Outerwear pull start $ 19.99
Outerwear crankcase/flywheel $ 19.99
Shock wear $ 10.00
Chili racing belt drive kit $ 129.00
NGK cmr7h $ 2.79
Hitec 5765mh steering servo $ 73.99
Alloy servo horn $ 5.99
Hitec 7955tg high torque titanium throttle/brake servo $ 94.95
Integy alloy servo horn $ 7.00
Rc screwz kit $ 59.95
OBR wing wrap $ 14.99
Turtle racing HD clutch case $ 51.00
Total of $ 3,132.75 only in upgrades
Rampage Xt priced at $ 569.99
Basically total of $ 3,702.74 to build up one like this if you are a regular person like me and not a dealer and off course this is only truck price and parts price prob 4k for shipping parts ever thing.
Done by me
Painted body, nothing professional but it looks cool
I did tempered all differential cups and re enforce with a 3/4 type L cooper pipe small rings
Did limiting arm cables
Install small electrical box I believe from the xb-e for receiver and killer bee switch, so trouble free and no hassle to remove or place battery. Nice and neat.
All assembled with properly thread lock.
So back to the subject not really need to sell but to many rc's around the place...lol...more toys than my kids and wants free up and make more space. Pretty soon will list my xb.
This truck is nice is nasty and powerful, very fast trouble free drive as it should and you most have some throttle control because she turn out to be a beast and engine is not even break in yet so you will have to finish that. Other than that is RTR inly need gas and rock roll, currently I have on road tires on it, what you see in pictures is what you get.
She is not brand new but is close as is can get small dings here and there for little usage on small hole on frame, one screw broke it at the cage (super easy fix) but other than that is perfect body looks good and descent basically as said thing looks new and barely used.
Fell free to contact me for further questions.
Ships only to lower 48.
And as you most know due to the nature of our hobby is sold as is, so please make all questions necessary before you purchase this.
Thank you
Last edited by a moderator:
