Bulldogger
Member
- Messages
- 68
Okay after trying to decide between this and the Losi WRC, I went with another Redcat. Too be honest I have always had really good luck with Redcat's and only minor issues like a bearing going south and that is usually the factory ones not aftermarket. That plus the cost of the Losi was pretty high and the body is like $300 unpainted to replace if you damage it, and you always damage it.
Anyway built this XR, and went with the metal gear plate and lay shaft, metal steering servo mount, metal top plate and metal center differential mount. For radio gear I went with Hitec 5755 steering servo and Hitec 5645 throttle/brake servo both with metal horns. I also went with the Losi DX2E with AVC receiver for fun.
Going to break it in and do some speed runs, then I am going to switch out the exhaust to the Jetpro and see what I gain in top speed.
Anyway built this XR, and went with the metal gear plate and lay shaft, metal steering servo mount, metal top plate and metal center differential mount. For radio gear I went with Hitec 5755 steering servo and Hitec 5645 throttle/brake servo both with metal horns. I also went with the Losi DX2E with AVC receiver for fun.
Going to break it in and do some speed runs, then I am going to switch out the exhaust to the Jetpro and see what I gain in top speed.