After breaking a couple bodies in the winter cold weather, I've decided to spend my time modding the beast instead of bashing.
Decided to turn my XT into a lighter/faster version of an MT. I will be plasti dipping my XT body and I will also be running a trimmed XCS body. I found out I purchased my truck from forum member Dreggsta. He did a GREAT job upgrading this. Here's what was done when I got it
*upgraded bearings throughout all of drivetrain in transmission gear, center/front/rear differentials
*freshly lubed differentials
*ngk spark plug
*fuel cap vented
*killer bee
*aluminum front/rear shock towers
*MT shocks front/rear
*DDM Dominator pipe
*Drive cups are reinforced by pressing copper pipe over the drive cups
*24mm hpi baja wheel adapters
*XQ throttle servo
*Hi Tec 805 sterring servo
*5900mah 6v battery hump pack
*aluminum transmission gear plate with oversized bearings
*aluminum center diff mounts
*7075rc front/rear aluminum wheel hubs with oversized bearings
*front bumper
*998 walbro carb
*dt1 dual flow oiled foam filter and prefilter
*pull cover prefilter
Project M-XT
Imex J-7 wheels/tires - DONE
Killer Bee wire pull starter - DONE
replaced lower shock mount bolts with longer bolt/lock nut - DONE
Aluminum body posts - DONE
Shoe Goo/drywall mesh taped bodies - DONE
8,000rpm clutch - DONE
10mm axles - DONE
Custom aluminum Roll Cage
Paint roll cage other interior parts to match body
View attachment 7015
Decided to turn my XT into a lighter/faster version of an MT. I will be plasti dipping my XT body and I will also be running a trimmed XCS body. I found out I purchased my truck from forum member Dreggsta. He did a GREAT job upgrading this. Here's what was done when I got it
*upgraded bearings throughout all of drivetrain in transmission gear, center/front/rear differentials
*freshly lubed differentials
*ngk spark plug
*fuel cap vented
*killer bee
*aluminum front/rear shock towers
*MT shocks front/rear
*DDM Dominator pipe
*Drive cups are reinforced by pressing copper pipe over the drive cups
*24mm hpi baja wheel adapters
*XQ throttle servo
*Hi Tec 805 sterring servo
*5900mah 6v battery hump pack
*aluminum transmission gear plate with oversized bearings
*aluminum center diff mounts
*7075rc front/rear aluminum wheel hubs with oversized bearings
*front bumper
*998 walbro carb
*dt1 dual flow oiled foam filter and prefilter
*pull cover prefilter
Project M-XT
Imex J-7 wheels/tires - DONE
Killer Bee wire pull starter - DONE
replaced lower shock mount bolts with longer bolt/lock nut - DONE
Aluminum body posts - DONE
Shoe Goo/drywall mesh taped bodies - DONE
8,000rpm clutch - DONE
10mm axles - DONE
Custom aluminum Roll Cage
Paint roll cage other interior parts to match body
View attachment 7015
Last edited by a moderator: