Here is a picture of my MT5 next to my brothers Baja. Over the next few weeks I'm going to be adding an x-can and a race ported 29cc head kit. I did change the clutch spring to HPI's high response spring. It was bogging bad on take off without it. This truck definitely needs more power than a stock cy23. Also the front shock springs are a bit to short, you have to adjust the preload all the way down to take up all the slack. Even then at full droop there is a small gap. I plan to get the RAMTech 20%+ springs to fix this. Over all, this is the best RC I have ever bought.