on Rampage XT, removing the flywheel cover.

DEA

Member
Messages
8
Location
Louisville, KY
Do the screws through the chassis secure into the engine or in the cover only? I tried installing a kill switch and have stripped the heads. if the screws do not enter the engine, I could drill the heads and if I cannot remove them from the cover, replace the cover? Am I on the right path?
 

Dobber72

Well-Known Member
Messages
69
Location
Booneville
Do the screws through the chassis secure into the engine or in the cover only? I tried installing a kill switch and have stripped the heads. if the screws do not enter the engine, I could drill the heads and if I cannot remove them from the cover, replace the cover? Am I on the right path?
You can drill the heads or retap them to standard threads because I have done this for some of my buddies rigs or if you don't have a tap use a small sheet metal screw in a pinch.
 

Dobber72

Well-Known Member
Messages
69
Location
Booneville
You can drill the heads or retap them to standard threads because I have done this for some of my buddies rigs or if you don't have a tap use a small sheet metal screw in a pinch.
Oh to answer your ? They do not go into the motor that far.
 
  • Like
Reactions: DEA

Members online

Latest posts

Top