new 5765 servos

[kydo32]

ok bought two 5765 steering servos easy to put on but have problem if I go left steering arm hits battery box and also right side hits differential I have the arms on the first hole of the horn ,never did before tried adjusting end points and didn't help also servos make slight whinning sound any ideas ? I did cut off the knobs where screw servo on to mount could did something wrong try setting d/r and lose steering radias doesn't barley turn .servos were set at 0 when installed horns. it seems like one servos working more then other but settings on radio are evenly set

 

[Deluge]

Do you have a pic of your setup? Maybe we can spot something out of place. Sounds like just a trim issue, though.

 

[kydo32]

on throttle side it hits servo all the way right and on battery box side hits battery box when all the way left right seems to turn more then left side and trims and d/r and end points are set View attachment 7381 View attachment 7382 View attachment 7383 View attachment 7384 my steering arms are not screwed all way down in pic cause trying get setting right if truck is setting on floor and turn wheels I get a hum like whine sound from servos but when I lift front tires off ground I get the whine noise but then goes away is that normal too ? also all settings are even but servo seems to want to turn further right then turn left

















/monthly_2014_05/583c607092ae8_steering001.jpg.e82a08668c75a5933b8ec901b0410697.jpg

/monthly_2014_05/583c6070941c8_steering002.jpg.cfd624fa925ae1623a2da3324426287d.jpg

/monthly_2014_05/583c607095a61_steering003.JPG.ea498335ed9e7e62a87028b1b0c524db.JPG

/monthly_2014_05/583c6070975cc_steering004.JPG.d032c441ab662d2c64b22598164eee58.JPG

 

[kydo32]

can you or anybody take pic of their servos including the steering arms connected ? also the horns ? And if possible show how it looks when turned all the way right and all the way left would be great help so I can see difference

 

[Deluge]

Are the linkages level? If they're not, that'll cause some rubbing.