I need a new Receiver battery

[audiobranz]

I lost my old stock receiver battery I was looking at several different websites but I don't know what battery Park to buy I want long-run time longer run time then the stock battery I have all Stock servos

 

[rcgasser]

http://www.davesmotors.com/ddm-black-magic-ni-mh-6v-hump-receiver-battery-pack-for-hpi-baja-5b-5t-5sc-4200mah-4600mah-5000mah-.html

The higher the mah the longer the run times.

 

[topblissgt]

Heres a nice one

http://www.dynamiterc.com/Products/Default.aspx?ProdID=DYN1442

 

[Deluge]

Keep in mind 5000+ will be a tight fit in the radio box.

 

[topblissgt]

Keep in mind 5000+ will be a tight fit in the radio box.

Its the same sub C 5 cell hump pack as any other receiver pack. It will fit as well any a lower mah pack does, no?

 

[Deluge]

I had a 4200 and a 5000. The 5000 was slightly larger.

 

[topblissgt]

When I get mine I will report back my findings.. Thanks

 

[rcgasser]

Yes the 5000 battery is larger then the stock battery which is 2500.

 

[topblissgt]

Happy to report that the 5100 mah battery fits fine in the stock battery box.

Here is the stock battery and the 5100 one

 

[Deluge]

Nice! I was assuming you had an MT with the smaller radio box. My bad.

 

[topblissgt]

Have a Chimera.. Not sure how the box compares to other Redcats

 

[kh0de91]

Are Venom 5000 mAh will fit on a Redcat MT V3 battery box..

thanks

 

[Ildy666]

Yes it will.a little tight but it fits.

 

[kh0de91]

Are this battery pack fit into a Rampage MT V3, 32cc engine?

thanks

 

[307_Proud]

Ive been looking at the Venom 5000mah rx pack from Tower Hobbies. As well as considering the Dynamite pack from DDM. My question is, are both of these connectors going to plug in directly to my MT? They look slightly different than the plug on my truck? I know the batteries say they have a "universal plug" on them. But our trucks have the smaller, 2 prong plug for the on/off switch.

 

[Ildy666]

I use venom and all i did is trim 9ff the plug a little so it fits.and I charge using the the Tamiya plug.

 

[rcgasser]

I use venom and all i did is trim 9ff the plug a little so it fits.and I charge using the the Tamiya plug.

+1 yes that is all that is needed.