Few probs need help

[erdoganog]

Hi guys so last time i ran the truck was 2 months ago and it ran ok


So today after some cleaning i tried to take it out for a spin and i got nothing but a sore arm


It ran like 1 second only once thats it


And now the pull start i think gave on me? because it wont even crank anymore, it just spins freely or a bearing is messed up feels like its not "catching"


Oh and everything is stock btw


So what could be it other than my pull start problem


Carb took a dump?


Maybe has to do with the ignition? wires sparkplug etc?


Thanks

 

[erdoganog]

OH and i never had a problem starting this truck ever it always fired up 2-3 tries!

 

[Guest]

Check for spark. Plugs go out coils normally don't.

If the plug is wet you just flooded it.

Make sure your tank is vented.

 

[erdoganog]

Check for spark. Plugs go out coils normally don't.If the plug is wet you just flooded it.

Make sure your tank is vented.

thanks i will do a check on those

 

[erdoganog]

and what about the pull start do i need a new one or is it a bearing problem?>

 

[Guest]

The stock starter has a plastic prawl. That is what brakes. Those pull starter are designed to be disposable. Most have them for under $20. Not worth it trying to rebuild it.

 

[erdoganog]

The stock starter has a plastic prawl. That is what brakes. Those pull starter are designed to be disposable. Most have them for under $20. Not worth it trying to rebuild it.

figured lmao this is my second pull start within 6 months im pulling on these pull starts as if im in the gym lol

 

[erdoganog]

And anything else i should replace while im at it?

Ive thought about replacing the stock airfilter too

 

[Guest]

That would be a good idea. The stockers are not the best IMO.