Welcome to RedcatRampageForum! Are you a Redcat fan? If so you're in luck as you've have arrived to the biggest and best RedcatRampage RC community.
Come join our community and ask your questions, show off your Recat RCs and share your experience!
Keep an eye on that bore reducer, mine only lasted about 5 minutes before allowing the pinion to move.VerySlow1 said:I'm currently running a T10 when running 6s and I have no temp issues running thru a full pack of 5800s. When I'm running 8s I put in the T8. Picked them up for Kershaw Designs along with the bore reducer as they are 8mm. Wasn't sure what I would be running with the Leopard so I picked up some spares T8-T15, T18 & T20 because they were on clearance ;-)
I have be working on pinion gears in the 8 and 9 tooth range. I have concluded that the gears provided by Redcat are bastard gears and can't be duplicated smaller than 10. If you go below 10, the gears will bind. The Kershaw gears are a standard gear design and although they will work they will self destruct with time.Obeast44 said:Keep an eye on that bore reducer, mine only lasted about 5 minutes before allowing the pinion to move.
Its 50mph with the 1717 according to BrianGs speed calc. The stock setup is about 38mph top speed on pavement.Dirtconvert said:Would like to see 50 mph as a real figure. Have yet to gps mine but I am guessing around 30 out of the box.
8000may zippy flightmax at hobby king. Where did you order your castle 1717?lateralrectus said:Just ordered my XBE and a Castle 1717. Does anyone know if the motor fits right in without modification? Can I use the stock ESC?
Anyone have any good battery suggestions?
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Redcat Rampage RC community for Redcat RC enthusiasts that covers all aspects of the Redcat brand!
Register Today It's free! This box will disappear once registered!