Welcome to RedcatRampageForum! Are you a Redcat fan? If so you're in luck as you've have arrived to the biggest and best RedcatRampage RC community.
Come join our community and ask your questions, show off your Recat RCs and share your experience!
That's what I'm planning to do. Can you share your specs on how you did it. Can you send me the links for the parts to buyYou will have to make your own like I did.
That's what I'm planning to do. Can you share your specs on how you did it. Can you send me the links for the parts to buyYou will have to make your own like I did.
That's what I'm planning to do. Can you share your specs on how you did it. Can you send me the links for the parts to buyYou will have to make your own like I did.
That's what I'm planning to do. Can you share your specs on how you did it. Can you send me the links for the parts to buyYou will have to make your own like I did.
Can you help me out on the parts I need. I would greatly appreciate it.That's what I'm planning to do. Can you share your specs on how you did it. Can you send me the links for the parts to buy
What is needed to convert to belt system?You will have to make your own like I did.
Thank you for sharing. Were you happy with how it worked?here is my version of a belt drive, gear ratio 1:0.75, the tension roller consists of two parts to make it easier to remove the belt, the tension roller shaft, brake shaft and spacer bushings were also made, there is also a spacer bush between the tension roller bearings, this is important, otherwise when When tightening the nut, the bearings will jam. the casing was made using 3D printing Greetings from Russia
Thank you for sharing. Were you happy with how it worked?here is my version of a belt drive, gear ratio 1:0.75, the tension roller consists of two parts to make it easier to remove the belt, the tension roller shaft, brake shaft and spacer bushings were also made, there is also a spacer bush between the tension roller bearings, this is important, otherwise when When tightening the nut, the bearings will jam. the casing was made using 3D printing Greetings from Russia
I am interested in any information as wellDo you have a website where I can buy them?Do you have the links on what to get? I appreciate the reply...hear fro you soon
Thank you for sharing. Were you happy with how it worked?here is my version of a belt drive, gear ratio 1:0.75, the tension roller consists of two parts to make it easier to remove the belt, the tension roller shaft, brake shaft and spacer bushings were also made, there is also a spacer bush between the tension roller bearings, this is important, otherwise when When tightening the nut, the bearings will jam. the casing was made using 3D printing Greetings from Russia
I am interested in any information as wellDo you have a website where I can buy them?Do you have the links on what to get? I appreciate the reply...hear fro you soon
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Redcat Rampage RC community for Redcat RC enthusiasts that covers all aspects of the Redcat brand!
Register Today It's free! This box will disappear once registered!