super bee kill switch

[454chad]

hello everybody i was wondering how you hook the super bee up to a stock rampage radio its a 2 ch radio thank you

 

[rampagemt]

you run a y harness on the steering channel and thats it

 

[Ffdfiretruck]

Is the super bee available yet?

 

[Ildy666]

Killer bee or super bee?

 

[Trickle007]

they dicontinued the old V1 and V2 Killer bee switches and now they have the Super Bee kill switch. http://www.killerrc.com/store/store.php

 

[454chad]

it is a super bee just got it a couple days ago so even the super bee hooks up the same as a killer bee thank you

 

[Deluge]

Here are the instructions for the SuperBee. In case you need them.

SuperBee Instructions

 

[oskygt]

I'm using a 3PM radio, with the SuperBee, can I still shut down the engine by turning off my radio?

 

[Deluge]

Yes, you can.

 

[oskygt]

Thank you Bro!

 

[brio]

hello everybody i was wondering how you hook the super bee up to a stock rampage radio its a 2 ch radio thank you

It's a 2 ch Tx but a 3 ch Rx so u don't have to use a splitter , you can use the 3rd ch port on the Rx for the Super Bee.

 

[454chad]

It's a 2 ch Tx but a 3 ch Rx so u don't have to use a splitter , you can use the 3rd ch port on the Rx for the Super Bee.

how do i shut off the failsafe in the stock radio or can i leave it on thank you

 

[brio]

You can leave the failsafe active if you choose to. Not sure how to deactivate it, you can check the small CD that came with the system. There are instructions on there.

 

[454chad]

You can leave the failsafe active if you choose to. Not sure how to deactivate it, you can check the small CD that came with the system. There are instructions on there.

i figured it out you just push the button on the rx and it shuts it off to turn it on push button and move to brake on the tx thank you

 

[RobCT1]

Super bee stop engine button?

I want to replace the factory stop button with the one that came with the super bee kill switch. I removed the 4 screws holding the cover and it won't seperate to remove the old switch. I don't want to force it. Is there another screw I'm not seeing?

 

[Guest]

There are 4 bolts to the case 2 screws to the shroud and 2 screws from under the chassis. A total of 8 in the flywheel cover.

 

[g-one215]

My hobby shop told me to connect it to the throttle servo is this rite

 

[BertR]

If your using a killerRC kill you should if its a 2 Chanel go from the steering with the y harness

 

[Guest]

You can also use the open slot on the receiver.

 

[Greggfromohio]

super bee kill switch

You can also use the open slot on the receiver.

If you connect it to the open spot on the receiver how should you set the dip switches?