Steel Gears

[Martin]

About 10:1 and up and you are in the begin of a short ratio range (depend on what tire/wheel) and below 7:1 ratio that start to be a high speed ratio.


29/31/26/24 give you: 8.87:1


25/35/25/25 .......... 12.6:1 a little short....


You have a reference point for 29/31/26/24 combination, you know how your Buggy work with that combination, so.. take the calculator then find the different possible combination and calculate it, you can buy plastic gear for a test drive, they are cheap.

 

[bbuzzard]

I appreciate your quick response! I wasn't good with the math...is there an online calculator that I can use to figure out these combos?

 

[v555]

hope that helps.highest gearing with your gears will be31/29+26/24 31/29+24/26 29/31+26/24 lowest-29/31+24/26



/monthly_2009_12/583c605c68ed2_redcatikigukast.jpg.96f7d613aab6d1e135416acfae9f78d1.jpg

 

[bbuzzard]

Thanks...that's what I needed to know!!

 

[Deluge]

1+ on that. I had a set that was off center and it was disaster for $65 worth of gears and damaged most of the aluminum squares and my lay shaft. I use plastic and have NO issues. I run a OBR 27.2 race ported with lightened piston and still have the set I started out with.

Apparently Marty Feldman is their machinist.