Welcome to RedcatRampageForum! Are you a Redcat fan? If so you're in luck as you've have arrived to the biggest and best RedcatRampage RC community.
Come join our community and ask your questions, show off your Recat RCs and share your experience!
Thanks Imadman.imadman said:these Cheapest And Easiest Thing To Use Is A Piece Of Solder, Then You Can Use A Caliper To Measure Your Squish. Other Than That There Are Gauges And Stuff You Can Use But They Are Not Cheap.
You're talking about 'quench area' and trying to use a tool that screws into the spark plug hole? I doubt you are going to get an accurate measurement.max 1 said:Dose Any One Now Wher To Get A Squish Clearence Tool.that Screws Into The Spark Plug Hole.
Ahh, solder. Good idea.IMADMAN said:These cheapest and easiest thing to use is a piece of solder, then you can use a caliper to measure your squish. Other than that there are gauges and stuff you can use but they are not cheap.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Redcat Rampage RC community for Redcat RC enthusiasts that covers all aspects of the Redcat brand!
Register Today It's free! This box will disappear once registered!