metal finisher
Contributor
- Messages
- 154
- Location
- green bay wi.
check out my build in my album
Welcome to RedcatRampageForum! Are you a Redcat fan? If so you're in luck as you've have arrived to the biggest and best RedcatRampage RC community.
Come join our community and ask your questions, show off your Recat RCs and share your experience!
You can get a TORX bit that fits right into a damaged 3mm hex head if you pound it in with a hammer. Then, use a ratcheting screwdriver to unscrew the bolt. If the bolt has locktite make sure to heat it up to loosen the locktite. I've used that same dam TORX bit for years for stripped 3mm heads in all my cars. It's one of my most valuable tools. I'd suggest everybody go get one.jackson said:i wish i could be sharing a good experience but as of now am almost trowing my rampage out the window all of the screws are stock and they wont come out one by one they're making me angry to a point wich i canot do anything to it dam screws just decided not to come out so please some one give some light before i end up destroing what's left of it!
becouse of one dam screw i have to taje the whole truck appart and that's becoming a nightmare so guys please any advice on it? o by the way the screw heads are no longer of any fit what'so everam afraid i'll have to drill every one of them!
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Redcat Rampage RC community for Redcat RC enthusiasts that covers all aspects of the Redcat brand!
Register Today It's free! This box will disappear once registered!