kryptonite
Well-Known Member
- Messages
- 2,092
- Location
- on-du-run.
so lets take a list of some of the mods or upgrades we have on our rigs. this would be a good referance for our newcomers as to what "most" of us are doing. wether its a DIY mod or an aftermarket. whatever makes our rampage better,faster, or stronger. also feel free to put in some things you tried and DIDNT work.
my rig is still fairly new, so my list is short.
-upgraded diffs-3,000wt ofna diff oil, not sure how thats gona work
-longer shock springs,
-60wt,back, 50wt,front
-upgraded gear plate
-upgraded fuel tank vent
-front and rear lower aluminum arms
-aluminum stearing mount
-gutted stock can and removed stinger
-8000rpm clutch spring
-813 "punch" carb
-lowered mt body mounts for less damage,shoe goo'd body corners
-centered all drive shafts using foam earplugs
-DIY pullstart cover, and spun pull starter so can start with body on
-scanner rc steering and brake servo w/Y splice to steering servo,(st)320oz@6 volts,(th)200oz@4 volts
-futaba 3pm
-longer brake spring
-fast eddy bearing, not all
i will edit as parts come in..
my rig is still fairly new, so my list is short.
-upgraded diffs-3,000wt ofna diff oil, not sure how thats gona work
-longer shock springs,
-60wt,back, 50wt,front
-upgraded gear plate
-upgraded fuel tank vent
-front and rear lower aluminum arms
-aluminum stearing mount
-gutted stock can and removed stinger
-8000rpm clutch spring
-813 "punch" carb
-lowered mt body mounts for less damage,shoe goo'd body corners
-centered all drive shafts using foam earplugs
-DIY pullstart cover, and spun pull starter so can start with body on
-scanner rc steering and brake servo w/Y splice to steering servo,(st)320oz@6 volts,(th)200oz@4 volts
-futaba 3pm
-longer brake spring
-fast eddy bearing, not all
i will edit as parts come in..
Last edited by a moderator: