G-Man
Junior Member
- Messages
- 958
- Location
- Pittsburgh,PA
No I have a side mount ddm dominatorYeah it sounds good. Do you have a jet pro on yours? I'd like to get one but I could pass this cpi up for 50 bucks.
Welcome to RedcatRampageForum! Are you a Redcat fan? If so you're in luck as you've have arrived to the biggest and best RedcatRampage RC community.
Come join our community and ask your questions, show off your Recat RCs and share your experience!
No I have a side mount ddm dominatorYeah it sounds good. Do you have a jet pro on yours? I'd like to get one but I could pass this cpi up for 50 bucks.
Is it the same performance as a jet pro? And do you like it?No I have a side mount ddm dominator
I am not sure on performance. I love the pipe on the MT. So durable, sounds great, and lots of power. It tucks nicely between those big tires and is basically protected there. Sure it has rock nicks but still shinesIs it the same performance as a jet pro? And do you like it?
Performance comparison to the jetpro I am unsureI am not sure on performance. I love the pipe on the MT. So durable, sounds great, and lots of power. It tucks nicely between those big tires and is basically protected there. Sure it has rock nicks but still shines
Yeah it looks nice. The only reason I wanted a cpi was because there was almost no cutting on the body.I am not sure on performance. I love the pipe on the MT. So durable, sounds great, and lots of power. It tucks nicely between those big tires and is basically protected there. Sure it has rock nicks but still shines
I took one little notch out of my body right at the bend in the pipe. Bodies get trashed anyways IMO the way I run mine at least. I do have a few shelf queen bodies though lol. I don't run mine with that aluminum roll cage on either. The plastic is more durable. Do you bash yours?Yeah it looks nice. The only reason I wanted a cpi was because there was almost no cutting on the body.
Yeah I have already tore this body up and repaired it. From what everything I had read you had to cut half your body up for those pipes. Glad to hear you don't have to. Do you know of any other bodies that you can put on the mt besides the stock one?I took one little notch out of my body right at the bend in the pipe. Bodies get trashed anyways IMO the way I run mine at least. I do have a few shelf queen bodies though lol. I don't run mine with that aluminum roll cage on either. The plastic is more durable. Do you bash yours?
I just got a Ford F150 Raptor body made for a Xmaxx. Gonna paint it up once I get both my rigs running. Looks to fit decent. Bodies are hard to find for 5thsYeah I have already tore this body up and repaired it. From what everything I had read you had to cut half your body up for those pipes. Glad to hear you don't have to. Do you know of any other bodies that you can put on the mt besides the stock one?
Yeah I am finding that out. I looked at some xmaxx bodies and they are expensive lol. Hate to spend over 100 bucks to tear it upI just got a Ford F150 Raptor body made for a Xmaxx. Gonna paint it up once I get both my rigs running. Looks to fit decent. Bodies are hard to find for 5ths
See that little notch I cut out of the body near the bend of the pipe. That is the only cut. The side panel of the body warped a little from heat but you can't see it anywaysYeah I have already tore this body up and repaired it. From what everything I had read you had to cut half your body up for those pipes. Glad to hear you don't have to. Do you know of any other bodies that you can put on the mt besides the stock one?
Shoo Goo and drywall mesh it will never break. I did a brand new body on a 10th that way and it is a monster landing 20 foot jump on its lid lol.Yeah I am finding that out. I looked at some xmaxx bodies and they are expensive lol. Hate to spend over 100 bucks to tear it up
That's nice. I might have to get one.See that little notch I cut out of the body near the bend of the pipe. That is the only cut. The side panel of the body warped a little from heat but you can't see it anyways
You did it before you ran it? Or after it broke?Shoo Goo and drywall mesh it will never break. I did a brand new body on a 10th that way and it is a monster landing 20 foot jump on its lid lol.
After it broke on the MTYou did it before you ran it? Or after it broke?
Yeah that's what I did on mine. Pretty good stuff.After it broke on the MT
Once you get your f150 body done I would like to see it. Those are pretty cheap on tower hobbies.I just got a Ford F150 Raptor body made for a Xmaxx. Gonna paint it up once I get both my rigs running. Looks to fit decent. Bodies are hard to find for 5ths
I just got a Ford F150 Raptor body made for a Xmaxx. Gonna paint it up once I get both my rigs running. Looks to fit decent. Bodies are hard to find for 5ths
I think I'm going to make guards out of lexan they go the length of the chassis covering the holes. Also may make windows to fit the top area of the roll cage.If you find a decent body that fits the DR please let me know.
I'm sick of all the sand and crap getting in.
I've made windows for mineI think I'm going to make guards out of lexan they go the length of the chassis covering the holes. Also may make windows to fit the top area of the roll cage.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Redcat Rampage RC community for Redcat RC enthusiasts that covers all aspects of the Redcat brand!
Register Today It's free! This box will disappear once registered!