Which 7075rc hpi adapters

[Motakitty]

Hi im looking at these


http://7075rc.flyingcart.com/index.php?p=detail&pid=11&cat_id=


But what ones do I need 6mm or 10mm thread I have a xb with the stock drive shafts

 

[rcgasser]

It depends on when the XB was made they started out with the 6mm shafts first and then went to the larger 100mm shaft later just look at your and see if its the 6mm thinner or the 10mm thicker.

 

[Motakitty]

Ok mine is only like 2 months old but I'll measure em anyhow

 

[Guest]

You can tell just by looking at them.

.

6mm

.

10mm

 

[Motakitty]

Thanks rcdad I got the 10mm I measured too