Weight Comparisons

[hamster huey]

My last project was power to weight ratio so I have been busy weighing:


LB,OZ (rounded up to nearest oz)


The list is for both Rampage and Dunerunner. Some of the lighter Dunerunner parts will work on the Rampage. Some of the parts can be left off or altered to save weight.


Bodies:


TT clear open top 0,6


MT painted repaired w/shoe goo 1,6


TT stock closed top painted 0,10


HPIbaja4ME (mid length) 5,6


MT clear 1,6


MT painted w/one layer duct tape 1,8


Proline 5b truck conversion desert rat (short length) painted 1,15


5T trofeo painted (long length) 2,4


5t stock white w/spoiler + body clip mounts (mid length) 2,1


Pipes/mufflers:


5T large can muffler 0,7


Jetpro V3 Sprint77 rear mount 1,6


Side dom w/brackets + small x port 1,11


Stock muffler w/hose+stinger 0,6


TGN Xcan w/shortest stinger med xport 0,8


TGN Xcan w/med. stinger med xport 0,8


5bss pipe w/ alum header, coupler/clamp 0,6


Hex Adapters:


(2) 40 series 23mm adapters rears 0,2


(2) HPI rear 5b/5t w/pins 0,2


(2) Mt/tt stock w/pins 0,2


(2) HPI rear 1/2 extended 0,3


Electronics:


4200nimh 0,13


2000nicd 0,9


2000nimh stock 0,8


3000lifepo4 0,7


3800lifepo4 0,9


2100lifepo4 0,4


(1) 5745 servo 0,6


(2) 5745 servo 0,12


stock steering servo 0,6


stock v3 thr/br servo 0,3


stock 2.4 rx (.2) 0,1


fhss2 92624 rx (.3) 0,1


fhss2 92524 rx (.3) 0,1


Wheels/tires:


(2) Trencher/split six 2,13


(2) MT tire/wheel Vtwo 5,5


(2) 40 series moab 23mm 2,8


(2) MT tire/wheel Vthree 4,12


(2) excavator/desperado 2,12


(2) badlands rear/desperado rear rims 2,1


(2) hostile at/5b rear rims 1,15


(2) bowtie fronts/5b front rims 1,10


(2) bow tie rears/5b rear rims 2,0


(2) (1) bow tie front/5b front rim + (1) bow tie rear/5b rear rim 1,13


(2) 5T stock rear tires/wheels 2,8


(2) 5T stock front tires/wheels 1,15


(2) (1) 5t stock front tire/wheel (1) stock rear tire/wheel 2,3


Carbs:


813 0,3


668 0,4


Chassis:


Rampage main chassis 2,9


Dunerunner main chassis 2,13


Alum gear plate w/ D shaft plate 0,9


Plastic gear plate w/ D shaft plate 0,7


Gear cover 0,2


MT front/rear tower 0,5


Dunerunner front tower 0,3


Dunerunner rear bumper 54013 w/supports 0,2


MT front/rear bumper converted to skid w/supports 0,5


I will edit this as I get more wieghts or if I need to make a correction.


I don't know why I have different wieghts for the MT v1,v2,v3 but thats what I got.


Xcan weights are the same because I rounded up to the nearest oz

 

[soulja55]

dude......awesome work. i was wondering weights on the same items! thanks a bunch.....EXTREMELY HELPFUL!

 

[hamster huey]

Just added Xcan, 5t tires/wheels, stock muffler, carbs

 

[hamster huey]

Added main chassis, plastic gear plate, alum gear plate.

 

[nanoali]

very helpful thread!! where can you get de hpibaja4me body?

 

[hamster huey]

It was a lucky find for me on ebay. I have seen a similar body for a slash 4x4 but they are very heavy so not practical for a slash 4x4. Ill PM you a tip about them.

 

[Obeast44]

The HPIBaja4me body is 5t length, its too long for the Rampage. I contacted him sometime ago about making a shorter version for the MCD, FG and Redcat owners. He said there wasnt enough interest to warrant making the molds. Thread is here:http://www.redcatrampageforum.com/showthread.php?t=1922

 

[hamster huey]

Yes youre right. Ill edit to make a note. I compiled the list for the Rampage and Dunerunner but should note that for those who don't know.

 

[hamster huey]

Added lifepo batteries, dunerunner chassis, and 5b ss pipe.

 

[hamster huey]

added 5745 servo, MT towers, dunerunner front tower, dunerunner bumper, mt skid/bumper

 

[hamster huey]

Added receivers and stock servos.

 

[DemonRC]

We need this stickied so I'll just bump it.

 

[bbuzzard]

Great info!!!