colafiend2003
Well-Known Member
- Messages
- 45
16t or 18t.....want serious speed? Try a 20. But watch motor and esc tempsWhat pinion should I run with that motor
Welcome to RedcatRampageForum! Are you a Redcat fan? If so you're in luck as you've have arrived to the biggest and best RedcatRampage RC community.
Come join our community and ask your questions, show off your Recat RCs and share your experience!
16t or 18t.....want serious speed? Try a 20. But watch motor and esc tempsWhat pinion should I run with that motor
The 5898 is the better choice for clearance.
End to end of the motor can. Mine is snug in there. So I have 112mm of room....originally 108mm.What measurements are you using against the motor to make sure it fits?
Ok so I need less than 108mm of lengthEnd to end of the motor can. Mine is snug in there. So I have 112mm of room....originally 108mm.
Ok so I need less than 108mm of length
See the specs of the motor mounting holes. Generally, the 1/5 scale motors are all the same. It shows on the motor dimensions in their specs.Also, 7075says you have to specify which cam to use but I dknt see the 5898 as an option?
Ok I know the 5898 has 6 holes so I'll get the 6 hole one.See the specs of the motor mounting holes. Generally, the 1/5 scale motors are all the same. It shows on the motor dimensions in their specs.
Old fart I think...or Ol fart....he will tell you the cam needed.
Old fart I think...or Ol fart....he will tell you the cam needed.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Redcat Rampage RC community for Redcat RC enthusiasts that covers all aspects of the Redcat brand!
Register Today It's free! This box will disappear once registered!