RC Ascent 1/18

[BigID]

Ran my Ascent on Sunday 7/21 for the first time. Did awesome, really love it but one of the pins came out on the driveshaft and I lost half of the front. Couldn't find it. I ordered a new driveshaft and am thinking of either putting poster putty on the pins, or a small piece of duct tape on them so I don't have another issue like that. I've read that Locktite can damage the plastic but was wondering if anyone else had any wise ideas!

 

[realtee30]

I guess the import thing is to cover the pin holes so the pin wont slide out. Try some CA glue over the holes. That should work.

 

[realtee30]

Locktite will work on plastic as long as you don't over tighten it.

 

[BigID]

Locktite will work on plastic as long as you don't over tighten it.

Cool but it's just the pin connecting the front driveshaft looks like.

 

[BigID]

Locktite will work on plastic as long as you don't over tighten it.

Cool but it's just the pin connecting the front driveshaft looks like.

 

[BigID]

Locktite will work on plastic as long as you don't over tighten it.

Cool but it's just the pin connecting the front driveshaft looks like. No threads.

 

[Lmuha1985]

Ran my Ascent on Sunday 7/21 for the first time. Did awesome, really love it but one of the pins came out on the driveshaft and I lost half of the front. Couldn't find it. I ordered a new driveshaft and am thinking of either putting poster putty on the pins, or a small piece of duct tape on them so I don't have another issue like that. I've read that Locktite can damage the plastic but was wondering if anyone else had any wise ideas!

Use loctite 222