Dynamite Kill Switch Help

smokinzoltar

Active Member
Messages
27
I've installed the kill switch (+&- correctly on the coil and the way they came off the switch too). The other day while driving maybe 5 minutes, the truck ran away on me! Batteries in controller new, and fully charged hump in truck! I've got it on channel 3 on my receiver... Thinking hard about using this as when I don't use it, truck runs fine! Any ideas as to what is causing this? In assuming a short it something... But I'll be damned if I can find anything lending to that!
 

xcyx

New Member
Messages
1
Had the same issue last night with my xr and dynamite. Used me leg to stop it, bad idea. The red indicator light is on, and after about 3 to 5 min of driving the light would turn off on it's own and engine shuts off automatically. Batteries fully charged etc. Kept this behaviour until I would not stop, good thing I had it directed at me and used my leg instead of the product... dynamite failed.

Unsure why... will look at it today.
Any suggestions greatly appreciated as well.
 

smokinzoltar

Active Member
Messages
27
I'm seriously considering building my own. There's guys on this forum that does that with a Pico I think...once I took out the kill switch, everything runs fine again...no weird issues! Look around for that kill switch build... It's simple, and from what people post, it works great! That's what I'm trying most likely.
 

Members online

No members online now.

Latest posts

Top