BUM
Junior Member
- Messages
- 16
- Location
- Grangeville ID
I have a new hp baja clutch with 8000 rpm spring.The clutch slips bad it won't spin the tires in loose gravel.Any ideas? 
-
Welcome to RedcatRampageForum! Are you a Redcat fan? If so you're in luck as you've have arrived to the biggest and best RedcatRampage RC community.
Come join our community and ask your questions, show off your Recat RCs and share your experience!
clutch
- Thread starter BUM
- Start date
RampageHopUps
Well-Known Member
- Messages
- 4,865
- Location
- Chandler, AZ
You may have glazed the clutch bell on your last "ride". I would bet on it. Take the clutch bell out and lightly sand the inside. That should do it.
MOfroggy
Senior Member
- Messages
- 264
- Location
- Jacksonville, Texas
And turn it over before you put it back on.
BUM
Junior Member
- Messages
- 16
- Location
- Grangeville ID
Still slipping,changed spring sanded clutchbell and scuffed clutch shoes.Another new clutch time I guess???
flint mann
Senior Member
- Messages
- 228
- Location
- Ark City
did you put the clutch in backwards that will force the shoes harder against the bell so it will slip less
Sprint 77
Contributor
- Messages
- 1,056
- Location
- Gladewater Texas USA
Double check your set screws in the four sided hub on your gear stack onto the lay shaft one of them backed out will give you same problem as clutch slipping.
Create an account or login to comment
You must be a member in order to leave a comment
Create account
Create an account on our community. It's easy!
Log in
Already have an account? Log in here.
